How to replace the MAP Sensor on 2009 Chevrolet Silverado 1500?

Begin MAP Sensor replacement by disconnecting the engine harness connector from the MAP Sensor while avoiding any motion that could harm it. Next, remove the MAP Sensor bolt and, using a slight rocking motion while pulling straight up, remove the MAP Sensor from the upper Intake Manifold. Check the MAP Sensor seal for any signs of damage before getting a new one. When installing the MAP Sensor place the new MAP Sensor seal on the sensor if required and mount the sensor to the upper Intake Manifold while following all fastener security measures. Secure the MAP Sensor with the bolt while tightening it to 10 nm (89 lb in) then connect the engine wiring harness electrical connector to the MAP Sensor.

OEM 2009 Chevrolet Silverado 1500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 MAP Sensors found

View related parts
2009 Chevrolet Silverado 1500 Throttle Position Sensor
Part Number: 12711681
$45.69 MSRP: $92.78
You Save: $47.09 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; M.A.P. Sensor; Pressure Sensor; Boost Sensor; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12694725, 12644228, 12594942, 12701247
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.3 x 4.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12711681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, XFE, ZR2 | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2009 Chevrolet Silverado 1500 M.A.P. Sensor
Part Number: 55573248
$30.16 MSRP: $56.65
You Save: $26.49 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.2 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55573248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- LS, WT | 6 Cyl 4.3 L GAS
View related parts
2009 Chevrolet Silverado 1500 M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2009 Chevrolet Silverado 1500 MAP Sensor

With a comprehensive array of OEM 2009 Chevrolet Silverado 1500 MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Silverado 1500 MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Silverado 1500 Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2009 Chevrolet Silverado 1500?
A: Begin MAP Sensor replacement by disconnecting the engine harness connector from the MAP Sensor while avoiding any motion that could harm it. Next, remove the MAP Sensor bolt and, using a slight rocking motion while pulling straight up, remove the MAP Sensor from the upper Intake Manifold. Check the MAP Sensor seal for any signs of damage before getting a new one. When installing the MAP Sensor place the new MAP Sensor seal on the sensor if required and mount the sensor to the upper Intake Manifold while following all fastener security measures. Secure the MAP Sensor with the bolt while tightening it to 10 nm (89 lb in) then connect the engine wiring harness electrical connector to the MAP Sensor.