How to replace a spark plug on 2010 Chevrolet Silverado 1500?

The first step to replace a Spark Plug consists of removing the suitable Spark Plug wire boots which requires rotating each boot 1/2 turn while only grasping the boot itself or using the appropriate tool. The Spark Plug requires 1 to 2 turns of loosening before clearing away surrounding dirt by brushing or air blast. Put each plug into its own marked tray during the removal process according to cylinder number. The check and modification process of the Spark Plug gap must follow engine mechanical specifications. Follow this procedure for installing your Spark Plug to the Cylinder Head using hand pressure until it reaches a torque of 15 nm (11 lb ft). The inside of each Spark Plug wire boot needs dielectric grease gm p/n 12345579 (Canadian P/N 10953481) applied before putting back the appropriate plugs.

OEM 2010 Chevrolet Silverado 1500 Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Spark Plugs found

View related parts
2010 Chevrolet Silverado 1500 Spark Plug Part Number: 12681664
$9.22 MSRP: $16.46
You Save: $7.24 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spark Plug Assembly-Gasoline Engine Ignition; Spark Plug, Spark Ignition; Spark Plug,Glow
- Replaces: 12568387, 25330840, 12565030, 25161444
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.7 x 3.5 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 12681664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LS, WT | 6 Cyl 4.3 L GAS
View related parts
2010 Chevrolet Silverado 1500 Glow Plug Part Number: 12639701
$25.20 MSRP: $45.00
You Save: $19.80 (44%)
ADD TO CART
Product Specifications
- Other Name: Glow Plug, Glow; Diesel Glow Plug; Glow Plug, Spark Ignition
- Replaces: 97364968
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.5 x 1.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 12639701
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, SS, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Spark Plug Part Number: 12621258
Product Specifications
- Replaces: 12571164, 12563707, 12609877
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.9 x 3.7 x 1.1 inches
- Condition: New
- SKU: 12621258
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2010 Chevrolet Silverado 1500 Spark Plug

With a comprehensive array of OEM 2010 Chevrolet Silverado 1500 Spark Plug, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Silverado 1500 Spark Plug are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Silverado 1500 Spark Plug Parts and Q&A

Q: How to replace a spark plug on 2010 Chevrolet Silverado 1500?
A: The first step to replace a Spark Plug consists of removing the suitable Spark Plug wire boots which requires rotating each boot 1/2 turn while only grasping the boot itself or using the appropriate tool. The Spark Plug requires 1 to 2 turns of loosening before clearing away surrounding dirt by brushing or air blast. Put each plug into its own marked tray during the removal process according to cylinder number. The check and modification process of the Spark Plug gap must follow engine mechanical specifications. Follow this procedure for installing your Spark Plug to the Cylinder Head using hand pressure until it reaches a torque of 15 nm (11 lb ft). The inside of each Spark Plug wire boot needs dielectric grease gm p/n 12345579 (Canadian P/N 10953481) applied before putting back the appropriate plugs.