How to replace the front drive shaft on 2009 GMC Canyon?

The first task for front propeller shaft replacement involves lifting the vehicle. Record the front u-joint position against the pinion yoke on the front Differential as well as the rear u-joint position referring to the transfer case drive flange. Start by removing all retaining nuts and bolts attached to the drive flange before removing clamps with their bolts from the front drive axle pinion flange. Before replacing the front propeller shaft on a vehicle, technicians should tape or rubber-band the front u-joint bearing caps to stop their separation. To install the front propeller shaft position the reference marks on the front u-joint while removing tape or rubber band from the front u-joint installation. Apply pressure on retaining bolts only to achieve finger tightness for proper positioning of the front propeller shaft. After aligning the reference marks on the rear u-joint you should install both the front u-joint bolts and clamps. The propeller shaft receives installation onto the pinion flange through bolts that should be tightened to 20 nm (15 lbft). Additionally the front propeller u-joint clamps need bolt tightening at 20 nm (15 lb ft). Finally, lower the vehicle.

OEM 2009 GMC Canyon Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Drive Shafts found

View related parts
2009 GMC Canyon Drive Shaft, Front
Part Number: 25843685
$595.79 MSRP: $945.95
You Save: $350.16 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15104642
- Item Weight: 15.30 Pounds
- Item Dimensions: 35.0 x 7.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Axle Assembly, Rear
Part Number: 20777019
$1900.04 MSRP: $2445.37
You Save: $545.33 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly-Rear (3.73 Ratio); Axle Shaft
- Position: Rear
- Replaces: 25976727
- Item Weight: 79.70 Pounds
- Item Dimensions: 69.2 x 18.6 x 13.9 inches
- Condition: New
- SKU: 20777019
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Drive Shaft
Part Number: 25787948
Product Specifications
- Other Name: Shaft Assembly-Front & Rear Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Position: Front and Rear
- Replaces: 15236807
- Item Weight: 55.90 Pounds
- Item Dimensions: 92.9 x 6.8 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Drive Shaft
Part Number: 22811801
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 25787945
- Item Weight: 14.50 Pounds
- Item Dimensions: 79.4 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22811801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Drive Shaft
Part Number: 25787947
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15116624
- Item Weight: 15.60 Pounds
- Item Dimensions: 65.3 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25787947
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 GMC Canyon Drive Shaft
Part Number: 15286715
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Item Weight: 18.80 Pounds
- Item Dimensions: 61.0 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15286715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Drive Shaft
Part Number: 22811802
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft
- Replaces: 25792319
- Item Weight: 16.60 Pounds
- Item Dimensions: 90.2 x 6.8 x 8.8 inches
- Condition: New
- SKU: 22811802
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Drive Shaft
Part Number: 25792320
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Item Dimensions: 64.7 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25792320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 GMC Canyon Submodels:
- SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
2009 GMC Canyon Drive Shaft
Part Number: 25999660
Product Specifications
- Other Name: Shaft Assembly-Front & Rear Propeller; Driveshaft; Shaft, Propeller
- Position: Front and Rear
- Item Weight: 33.20 Pounds
- Item Dimensions: 89.4 x 6.7 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25999660
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SLE, SLT | 8 Cyl 5.3 L GAS

2009 GMC Canyon Drive Shaft

With a comprehensive array of OEM 2009 GMC Canyon Drive Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Canyon Drive Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Canyon Parts Questions & Experts Answers

Q: How to replace the front drive shaft on 2009 GMC Canyon?
A: The first task for front propeller shaft replacement involves lifting the vehicle. Record the front u-joint position against the pinion yoke on the front Differential as well as the rear u-joint position referring to the transfer case drive flange. Start by removing all retaining nuts and bolts attached to the drive flange before removing clamps with their bolts from the front drive axle pinion flange. Before replacing the front propeller shaft on a vehicle, technicians should tape or rubber-band the front u-joint bearing caps to stop their separation. To install the front propeller shaft position the reference marks on the front u-joint while removing tape or rubber band from the front u-joint installation. Apply pressure on retaining bolts only to achieve finger tightness for proper positioning of the front propeller shaft. After aligning the reference marks on the rear u-joint you should install both the front u-joint bolts and clamps. The propeller shaft receives installation onto the pinion flange through bolts that should be tightened to 20 nm (15 lbft). Additionally the front propeller u-joint clamps need bolt tightening at 20 nm (15 lb ft). Finally, lower the vehicle.

Related 2009 GMC Canyon Parts

Alternate Year Models

2008 GMC Canyon Drive Shaft 2010 GMC Canyon Drive Shaft