How to replace the Brake Proportioning Valve on 2009 GMC Savana 1500?

Before replacing the combination valve, you should raise the vehicle and use safety stands to hold it. Take off the electrical connector from the combination valve, then unplug the front and rear brake pipes. Take out the bolt that holds the combination valve in place and remove the valve. Set the combination valve onto the frame and put in the bolt, tighten it until you reach 10 nm (89 lb in). Tighten the front and rear brake pipes onto the valve with 30 nm (22 lb ft) of torque and then reconnect the electrical connection. At the end, make sure to bleed the brake system in the right way.

OEM 2009 GMC Savana 1500 Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Proportioning Valve found

View related parts
2009 GMC Savana 1500 Pressure Metering Valve Part Number: 15881645
Product Specifications
- Other Name: Valve Assembly-Brake Combination; Brake Proportioning Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.1 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15881645
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2009 GMC Savana 1500 Brake Proportioning Valve

With a comprehensive array of OEM 2009 GMC Savana 1500 Brake Proportioning Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Savana 1500 Brake Proportioning Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Savana 1500 Brake Proportioning Valve Parts and Q&A

Q: How to replace the Brake Proportioning Valve on 2009 GMC Savana 1500?
A: Before replacing the combination valve, you should raise the vehicle and use safety stands to hold it. Take off the electrical connector from the combination valve, then unplug the front and rear brake pipes. Take out the bolt that holds the combination valve in place and remove the valve. Set the combination valve onto the frame and put in the bolt, tighten it until you reach 10 nm (89 lb in). Tighten the front and rear brake pipes onto the valve with 30 nm (22 lb ft) of torque and then reconnect the electrical connection. At the end, make sure to bleed the brake system in the right way.