Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 GMC Yukon Submodels:
Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 GMC Yukon Submodels:
Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
Position: Passenger Side
Replaces: 25801594, 25890942
Item Weight: 0.80 Pounds
Item Dimensions: 2.1 x 2.0 x 13.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25906096
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 GMC Yukon Submodels:
Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
Position: Driver Side
Replaces: 25890943, 25801595
Item Weight: 0.70 Pounds
Item Dimensions: 4.0 x 3.1 x 14.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25906097
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 GMC Yukon Submodels:
Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
2009 GMC Yukon Brake Line
With a comprehensive array of OEM 2009 GMC Yukon Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Yukon Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 GMC Yukon Parts Questions & Experts Answers
Q: How to Replace a Brake Line in the Brake Master Cylinder on 2009 GMC Yukon?
A: The Brake Master Cylinder Reservoir Hose replacement work needs to start with turning OFF the ignition before any brake pedal use or stopping at ACCESSORY mode. Let the brake modulator and HPA release their pressure which requires 1 to 3 minutes. End engine operation then allow the pressure relief system to finish before shedding brake fluid from the reservoir beneath the fitting and placing it in accepted waste. To access brake fluid we disconnect the electrical level sensor, pull off the brake master cylinder return hose fast connector and the supply hose fast connector. Lift up the vehicle and take off the splash shield assembly by removing all ABS module holder clamps and bolts. Disconnect the BPMV supply hose quick connect to access its inlet port.install a cap to this port and fit a plug on the supply hose to avoid brake system emission and contamination. Use the same steps to secure the BPMV return hose quick connect by capping the outlet port and plugging the return line. Unfasten and unlatch the supply and return hoses from their holding points to take them out of the vehicle. Affix the supply and return hoses to their vehicle retainer points and fully engage the BPMV return hose quick connect. Fasten this connection for the BPMV supply hose. Fasten the ABS module splash shield then install and tighten the splash shield bolts to 20Nm (15lbft) torque while also placing the retainers. Lower the car and properly attach the supply and return brake master cylinder reservoir hoses. Top off the brake master cylinder reservoir with fluid.