How to replace the MAP Sensor on 2009 GMC Yukon?

To replace the Manifold Absolute Pressure Sensor, remove the intake manifold sight shield and unplug the electrical connector from the MAP sensor. Remove the sensor and cover the sensor seal with clean engine oil and then install the new sensor and retainer. Reconnect the electrical connector and reinstall the sight shield.

OEM 2009 GMC Yukon MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2009 GMC Yukon Throttle Position Sensor Part Number: 12711681
$46.60 MSRP: $94.64
You Save: $48.04 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; M.A.P. Sensor; Pressure Sensor; Boost Sensor; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12694725, 12644228, 12594942, 12701247
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.3 x 4.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12711681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Yukon Submodels:
- AT4, Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2009 GMC Yukon MAP Sensor

With a comprehensive array of OEM 2009 GMC Yukon MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Yukon MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Yukon MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2009 GMC Yukon?
A: To replace the Manifold Absolute Pressure Sensor, remove the intake manifold sight shield and unplug the electrical connector from the MAP sensor. Remove the sensor and cover the sensor seal with clean engine oil and then install the new sensor and retainer. Reconnect the electrical connector and reinstall the sight shield.