How to replace the Camshaft Position Sensor on 2009 GMC Yukon?

Wipe Camshaft Position Sensor area, lift and support car. Install disconnect engine harness, and leave harmonic balancer. Unscrew 2 harness bolts, unscrew top stiffener, de- connector, and sensor, and O-ring. Check, grease, reattach O-ring, sensor and harness, retighten bolts, re-attach wiring, lower car.

OEM 2009 GMC Yukon Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2009 GMC Yukon Camshaft Position Sensor Part Number: 12591720
$54.42 MSRP: $101.54
You Save: $47.12 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 12568983, 12585545
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.2 x 6.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12591720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Yukon Submodels:
- Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2009 GMC Yukon Camshaft Position Sensor

With a comprehensive array of OEM 2009 GMC Yukon Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Yukon Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Yukon Camshaft Position Sensor Parts and Q&A

Q: How to replace the Camshaft Position Sensor on 2009 GMC Yukon?
A: Wipe Camshaft Position Sensor area, lift and support car. Install disconnect engine harness, and leave harmonic balancer. Unscrew 2 harness bolts, unscrew top stiffener, de- connector, and sensor, and O-ring. Check, grease, reattach O-ring, sensor and harness, retighten bolts, re-attach wiring, lower car.