How to replace the rear brake line on 2010 Buick Lucerne?

To install the new brake hose start by lifting the vehicle above ground before you disassemble the wheel and tire setup. Clean off all dirt from both brake hose and brake pipe contacts before putting a rubber seal or plug on the open end of the pipe to stop fluid from leaking. Take the brake pipe fitting off the brake hose, then loosen the brake hose with a flat tool. Take off the brake hose from its bracket and from the brake caliper while discarding both copper brake hose gaskets since they stick to these parts. Insert a suitable stopper into the caliper bolt hole to keep fluid from leaking out. First undo the rubber plug on the caliper bolt hole and put new copper brake hose gaskets into place. Install the brake hose bolt with new gaskets and connect it to the caliper by tightening it to 40 nm (30 lb ft) while keeping the hose straight and free of twists. Push the brake hose onto the bracket and install the brake hose retainer again. Join the brake pipe fitting and brake hose with the rubber cap removed. Tighten this junction to 18 nm (13 lb ft). Do not drive the vehicle without achieving a solid brake pedal because air leaks in the system create real brake failure dangers. Press the brake bleeder valve open and put on the tire while letting the brake system bleed.

OEM 2010 Buick Lucerne Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2010 Buick Lucerne Flex Hose, Front Passenger Side
Part Number: 19366678
$30.73 MSRP: $57.67
You Save: $26.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15850972
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 2.1 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2010 Buick Lucerne Flex Hose, Front Driver Side
Part Number: 19366720
$30.67 MSRP: $57.59
You Save: $26.92 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15937523
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.2 x 2.0 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2010 Buick Lucerne Flex Hose, Rear Driver Side
Part Number: 19366676
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15283581
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366676
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2010 Buick Lucerne Flex Hose, Rear Passenger Side
Part Number: 19366677
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 15283582
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2010 Buick Lucerne Brake Line

With a comprehensive array of OEM 2010 Buick Lucerne Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Lucerne Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Lucerne Parts Questions & Experts Answers

Q: How to replace the rear brake line on 2010 Buick Lucerne?
A: To install the new brake hose start by lifting the vehicle above ground before you disassemble the wheel and tire setup. Clean off all dirt from both brake hose and brake pipe contacts before putting a rubber seal or plug on the open end of the pipe to stop fluid from leaking. Take the brake pipe fitting off the brake hose, then loosen the brake hose with a flat tool. Take off the brake hose from its bracket and from the brake caliper while discarding both copper brake hose gaskets since they stick to these parts. Insert a suitable stopper into the caliper bolt hole to keep fluid from leaking out. First undo the rubber plug on the caliper bolt hole and put new copper brake hose gaskets into place. Install the brake hose bolt with new gaskets and connect it to the caliper by tightening it to 40 nm (30 lb ft) while keeping the hose straight and free of twists. Push the brake hose onto the bracket and install the brake hose retainer again. Join the brake pipe fitting and brake hose with the rubber cap removed. Tighten this junction to 18 nm (13 lb ft). Do not drive the vehicle without achieving a solid brake pedal because air leaks in the system create real brake failure dangers. Press the brake bleeder valve open and put on the tire while letting the brake system bleed.