Make sure this part fits

GM 19366720
Flex Hose, Front Driver Side

2006-2011 GM

Customer Questions & Expert Answers (13)
GM 19366720 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    15937523
  • Manufacturer
    General Motors
Make sure this part fits
$30.67 MSRP: $57.59
You Save: $26.92 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366720 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366720 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you detach the brake hose from the brake pipe fitting for the 2010 Buick Lucerne? Posted by Customer
    A:
    Remove the brake pipe fitting from the brake hose, then use a flat-bladed tool to detach the brake hose retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in the brake hose replacement process for the 2008 Buick Lucerne? Posted by Customer
    A:
    Bleed the brake caliper at the bleeder screw, install the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after removing the tire and wheel assembly for the 2008 Buick Lucerne? Posted by Customer
    A:
    Clean all dirt and foreign material from the brake hose and brake pipe fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose for the 2009 Buick Lucerne? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What precaution should be taken after removing the brake hose for the 2007 Buick Lucerne? Posted by Customer
    A:
    Install a rubber plug into the brake hose bolt hole of the brake caliper to prevent fluid loss.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2007 Cadillac DTS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the installation process for the new brake hose for the 2009 Cadillac DTS? Posted by Customer
    A:
    Remove the plug from the inlet port of the brake caliper if necessary, install new copper brake hose gaskets, assemble the brake hose bolt and new gaskets to the brake hose, and install the brake hose bolt to the brake caliper, tightening it to the specified torque.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose for the 2008 Cadillac DTS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to prevent fluid loss and contamination for the 2006 Cadillac DTS? Posted by Customer
    A:
    Clean all dirt from the brake hose and brake pipe fittings, and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake pipe fitting for the 2007 Cadillac DTS? Posted by Customer
    A:
    Install the hose bracket and bolt to the strut assembly, tightening the bolt to 17 N.m (13 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after completing the installation for the 2010 Cadillac DTS? Posted by Customer
    A:
    Bleed the hydraulic brake system, install the tire and wheel assembly, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2006 Buick Lucerne? Posted by Customer
    A:
    First raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Driver Side 19366720 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366720 Flex Hose, Front Driver Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366720 Flex Hose, Front Driver Side fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 19366720 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Driver Side. The component 19366720 is constructed from durable material and its dimensions span 4.2 x 2.0 x 20.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366720 has available replacement options 15937523. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.