How to replace the front brake line on 2009 Buick Lucerne?

Before starting work raise and stabilize the vehicle and take off the tire and wheel parts. Wipe all dirt from brake hose and brake pipe parts before applying a rubber stopper over the uncovered brake pipe end to keep fluid from leaking. Use a flat-bladed tool to detach the brake hose retainer before you pull the brake pipe fitting out from the brake hose. Take out the brake hose from its bracket and brake caliper before discarding the two copper brake hose gaskets since they tend to adhere to the hose or brake caliper. Insert a rubber plug into the caliper bolt hole to stop fluid loss before removing the hose bracket bolt from the strut assembly. Install new copper brake hose gaskets into the caliper bolt hole by removing the rubber plug. Install the new brake hose bolt with the fitted gaskets onto the brake caliper and tighten it to 40 nm (30 lb ft). Also make sure the hose remains straight and unfurled during installation. Firmly join the brake hose to its bracket and fasten the retainer before taking off the rubber cap from the brake pipe. Fit the brake pipe to the hose while applying 18 nm (13 lb ft) torque before adding the hose bracket and strut assembly bolt which needs 17 nm (13 lb ft) torque. After bleeding the brake caliper you can install the tire and wheel set before lowering the vehicle.

OEM 2009 Buick Lucerne Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2009 Buick Lucerne Flex Hose, Front Passenger Side
Part Number: 19366678
$30.73 MSRP: $57.67
You Save: $26.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15850972
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 2.1 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Flex Hose, Front Driver Side
Part Number: 19366720
$30.67 MSRP: $57.59
You Save: $26.92 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15937523
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.2 x 2.0 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366720
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Flex Hose, Rear Driver Side
Part Number: 19366676
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15283581
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366676
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Buick Lucerne Flex Hose, Rear Passenger Side
Part Number: 19366677
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 15283582
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 13.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2009 Buick Lucerne Brake Line

With a comprehensive array of OEM 2009 Buick Lucerne Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Buick Lucerne Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Buick Lucerne Parts Questions & Experts Answers

Q: How to replace the front brake line on 2009 Buick Lucerne?
A: Before starting work raise and stabilize the vehicle and take off the tire and wheel parts. Wipe all dirt from brake hose and brake pipe parts before applying a rubber stopper over the uncovered brake pipe end to keep fluid from leaking. Use a flat-bladed tool to detach the brake hose retainer before you pull the brake pipe fitting out from the brake hose. Take out the brake hose from its bracket and brake caliper before discarding the two copper brake hose gaskets since they tend to adhere to the hose or brake caliper. Insert a rubber plug into the caliper bolt hole to stop fluid loss before removing the hose bracket bolt from the strut assembly. Install new copper brake hose gaskets into the caliper bolt hole by removing the rubber plug. Install the new brake hose bolt with the fitted gaskets onto the brake caliper and tighten it to 40 nm (30 lb ft). Also make sure the hose remains straight and unfurled during installation. Firmly join the brake hose to its bracket and fasten the retainer before taking off the rubber cap from the brake pipe. Fit the brake pipe to the hose while applying 18 nm (13 lb ft) torque before adding the hose bracket and strut assembly bolt which needs 17 nm (13 lb ft) torque. After bleeding the brake caliper you can install the tire and wheel set before lowering the vehicle.