OEM 2010 Cadillac DTS Shift Cable

2010 Cadillac DTS Parts Questions & Experts Answers

• Q: How to Replace the Shift Cable in an Automatic Transmission on 2010 Cadillac DTS?

  A: First step for shift cable replacement includes setting the park brake together with wheel chocking. Open the shift cable retainer to disconnect the cable terminal that controls the transmission manual shift lever pin. The release of the shift cable from the bracket requires you to push down on its locking tabs. First remove the console trim plate followed by detaching the shift cable terminal from the shift control pin before you remove the shift cable from the shift control base. Extract the shift cable grommet at the cowl panel then take out the shift cable from the vehicle. The shift cable installation requires you to pass it through the cowl panel before seating the grommet. Connect the shift control base with the shift cable before linking the terminal of the cable to the shift control pin. Reinstall the console trim plate after slapping in the shift cable to its bracket. Fasten the retainer of the shift cable as you connect the terminal to the transmission manual shift lever pin. Complete the adjustment of the shift cable.