How to replace the front sway bar link on 2010 Chevrolet Aveo?

A vehicle maintenance professional should firstly lift and support the vehicle while the front suspension stays free before removing the front wheel. Begin the procedure by removing both sway bar link nuts from the knuckle and link as well as disconnecting the sway bar from the knuckle using a sway bar link assembly. Reinstall the sway bar into the vehicle before you tighten both the bar-to-knuckle and bar-to-link nuts to 50 Nm (37 lb ft). Complete the process with front wheel reinstallation followed by lowering the vehicle.

OEM 2010 Chevrolet Aveo Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Link found

View related parts
2010 Chevrolet Aveo Stabilizer Link
Part Number: 95994977
$38.46 MSRP: $68.69
You Save: $30.23 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link
- Position: Front
- Replaces: 96391875
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.2 x 4.5 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95994977
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Sway Bar Link

With a comprehensive array of OEM 2010 Chevrolet Aveo Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Sway Bar Link Parts Questions & Experts Answers

Q: How to replace the front sway bar link on 2010 Chevrolet Aveo?
A: A vehicle maintenance professional should firstly lift and support the vehicle while the front suspension stays free before removing the front wheel. Begin the procedure by removing both sway bar link nuts from the knuckle and link as well as disconnecting the sway bar from the knuckle using a sway bar link assembly. Reinstall the sway bar into the vehicle before you tighten both the bar-to-knuckle and bar-to-link nuts to 50 Nm (37 lb ft). Complete the process with front wheel reinstallation followed by lowering the vehicle.