How to replace the Turn Signal Switch on 2010 Chevrolet Aveo?

Start by disconnecting the negative battery terminal to replace the multifunction switch. By unscrewing 6-8 lower steering column panel screws, you can rotate the wheel to reach screws 3-4 of the upper steering column cover panel before removing them. Pull out both the upper and lower steering column cover panel pieces. Press the tabs (2, 3) on both sides of the switch housing to pull out its Turn Signal Switch while detaching the electrical connectors (1, 4) from the switch. Plug the electrical connectors (1, 4) into the Turn Signal Switch and put it inside the switch housing assembly. Put back the upper steering column cover panel along with the lower steering column cover panel . Secure the lower steering column cover panel parts (6, 7, 8) using torque settings of 3 nm (27 lb in). Use the steering wheel to locate the upper steering column cover panel screw positions and install all screws (3 and 4) before tightening each one to 3 nm (27 lb in). Rejoin the battery negative cable at the end.

OEM 2010 Chevrolet Aveo Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Turn Signal Switches found

View related parts
2010 Chevrolet Aveo Multifunction Switch
Part Number: 96806619
$56.84 MSRP: $88.95
You Save: $32.11 (37%)
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Multi Purpose Switch; Headlamp Switch; Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Switch, Turn Signal Lamp
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.3 x 3.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96806619
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Headlamp Switch
Part Number: 96540683
$26.81 MSRP: $41.96
You Save: $15.15 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer & Turn Signal; Multi Purpose Switch; Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.4 x 3.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96540683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Turn Signal Switch

With a comprehensive array of OEM 2010 Chevrolet Aveo Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Turn Signal Switch on 2010 Chevrolet Aveo?
A: Start by disconnecting the negative battery terminal to replace the multifunction switch. By unscrewing 6-8 lower steering column panel screws, you can rotate the wheel to reach screws 3-4 of the upper steering column cover panel before removing them. Pull out both the upper and lower steering column cover panel pieces. Press the tabs (2, 3) on both sides of the switch housing to pull out its Turn Signal Switch while detaching the electrical connectors (1, 4) from the switch. Plug the electrical connectors (1, 4) into the Turn Signal Switch and put it inside the switch housing assembly. Put back the upper steering column cover panel along with the lower steering column cover panel . Secure the lower steering column cover panel parts (6, 7, 8) using torque settings of 3 nm (27 lb in). Use the steering wheel to locate the upper steering column cover panel screw positions and install all screws (3 and 4) before tightening each one to 3 nm (27 lb in). Rejoin the battery negative cable at the end.