How to replace the rear wheel bearing and hub on 2010 Chevrolet Aveo?

First detach the rear Wheel Speed Sensor when present then unscrew the Brake Drum. Take off the caulking nut using an unstake method. When pulling the Wheel Hub unit off the Spindle take note it may be difficult because the two center races might not fit properly. To put in the Wheel Bearing and hub assembly simply place it straight onto the Spindle while making sure the Wheel Bearing races are correctly aligned. Place and tighten the caulking nut onto the Spindle to 190 nm (140 lb ft) then perform staking on the nut. Reconnect the Brake Drum and Wheel Speed Sensor if it was equipped onto the vehicle.

OEM 2010 Chevrolet Aveo Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheel Bearings found

View related parts
2010 Chevrolet Aveo Wheel Bearing
Part Number: 95983139
$129.27 MSRP: $253.08
You Save: $123.81 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel; Axle Bearing; Front Wheel Bearing; Bearing; Bearing, Front Wheel Inner
- Position: Front
- Replaces: 94536117, 94535249, 94535247
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.2 x 3.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 95983139
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Front Hub
Part Number: 95492092
$55.20 MSRP: $108.06
You Save: $52.86 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Wheel Hub Repair Kit; Hub; Hub, Front Wheel Inner; Hub, Front Wheel
- Position: Front
- Replaces: 96535041
- Item Weight: 3.80 Pounds
- Item Dimensions: 7.9 x 7.5 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 95492092
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Hub & Bearing
Part Number: 95903586
$98.82 MSRP: $191.80
You Save: $92.98 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Wheel Bearing & Hub Assembly; Axle Bearing; Wheel Hub; Hub; Hub, Rear Wheel
- Position: Rear
- Replaces: 96471775
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 8.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 95903586
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Hub & Bearing
Part Number: 95903587
$103.86 MSRP: $185.46
You Save: $81.60 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Wheel Bearing & Hub Assembly; Axle Bearing; Wheel Hub; Hub; Hub, Rear Wheel
- Position: Rear
- Replaces: 96471776
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.1 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95903587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Wheel Bearing

With a comprehensive array of OEM 2010 Chevrolet Aveo Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the rear wheel bearing and hub on 2010 Chevrolet Aveo?
A: First detach the rear Wheel Speed Sensor when present then unscrew the Brake Drum. Take off the caulking nut using an unstake method. When pulling the Wheel Hub unit off the Spindle take note it may be difficult because the two center races might not fit properly. To put in the Wheel Bearing and hub assembly simply place it straight onto the Spindle while making sure the Wheel Bearing races are correctly aligned. Place and tighten the caulking nut onto the Spindle to 190 nm (140 lb ft) then perform staking on the nut. Reconnect the Brake Drum and Wheel Speed Sensor if it was equipped onto the vehicle.