ChevyParts
My Garage
My Account
Cart
OEM 2010 Chevrolet Cobalt Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Shift Cables found
2010 Chevrolet Cobalt Shift Control Cable
Part Number: 20921511$48.70 MSRP: $76.28You Save: $27.58 (37%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 15219900, 25821641, 25917883
- Item Weight: 2.30 Pounds
- Item Dimensions: 14.7 x 14.6 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20921511
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable Assembly-Manual Transmission Shift Lever; Cable, Transmission Control Cable
- Item Weight: 2.30 Pounds
- Item Dimensions: 44.0 x 19.8 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25798498
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Item Weight: 2.20 Pounds
- Item Dimensions: 14.0 x 13.1 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25857595
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Cobalt Shift Cable
With a comprehensive array of OEM 2010 Chevrolet Cobalt Shift Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Cobalt Shift Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Chevrolet Cobalt Shift Cable Parts Questions & Experts Answers
- Q: How to replace the floor shift cable on 2010 Chevrolet Cobalt?A: Start by lifting and supporting the automobile before beginning the task of floor shift control cable replacement. Use a wrench to remove the Shift Cable retaining nut situated by the Exhaust Heat Shield before pulling out the Shift Cable from the transmission cable bracket. The-installation-process-starts-by-making-the-vehicle-dropping-to-the-low-position-and-then-unclipping-the-cable-from-the-park/neutral position switch. The console removal step should start by disconnecting the Shift Cable from the shift control assembly. Position the driver side front carpet aside and disassemble the grommet from the Floor Pan after which you will pull the cable through the driver floor opening to finish removing it. To accomplish the installation process guide the new cable through the driver floor opening before mounting the grommet level with the floor hole. First reinstall both the driver side front carpet and shift the cable to the shift control assembly before putting the console in place. Install the Shift Cable linkage by connecting it first to the park/neutral position switch and then to the transmission cable bracket. Weld the vehicle before putting in the Shift Cable retaining nut which should be placed around the Exhaust Heat Shield then tighten it to 10 nm (89 lb in). Inspection of shift control cable movement should be performed when the vehicle is at ground level to verify suitable cable functioning throughout all gear ranges.
Related 2010 Chevrolet Cobalt Parts
2010 Chevrolet Cobalt Clutch Master Cylinder
2010 Chevrolet Cobalt Transmission Pan
2010 Chevrolet Cobalt Automatic Transmission Filter
2010 Chevrolet Cobalt Automatic Transmission Shift Levers
2010 Chevrolet Cobalt Automatic Transmission Shifter
2010 Chevrolet Cobalt Clutch Disc
2010 Chevrolet Cobalt Clutch Slave Cylinder
2010 Chevrolet Cobalt Flywheel
2010 Chevrolet Cobalt Pressure Plate
2010 Chevrolet Cobalt Transmission Assembly