How to replace the digital radio antenna cable on 2010 Chevrolet Colorado?

When replacing the Digital Radio Antenna Cable start by performing Mobile Telephone and Navigation Antenna Coaxial Cable Replacement (UE1, U2K) for vehicles that have OnStar(R). Begin by dropping down the front section of the headliner to reach the digital radio antenna connectors before removing these cords. Separate the 2 upper coax cable retainers from the header panel while also removing the 3 coax cable retainers from the windshield pillar. Lower the compartment door all the way down until you can disconnect the digital receiver extension cable from its receiver location. Remove the retainers from the I/P section of the vehicle then disconnect all electrical elements. Use a mechanics wire to attach to the coax cable's end before detaching the retainer from the I/P. Pull upward on the cable from behind the I/P to free it while leaving the mechanics wire in place. The mechanics wire from the existing coax cable should be fastened to its terminal before pulling downward for I/P positioning. The coax cable retainers need to be mounted on the hinge pillar and I/P. Install the digital receiver extension cable by connecting it to the receiver then securing retainers to the I/P before plugging in the electrical connector. The I/P compartment door must close while technicians should perform antenna connector connections to the windshield pillar. To complete the installation process you need to fasten the 2 upper coax cable retainers to the header panel before you set the headliner in place.

OEM 2010 Chevrolet Colorado Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Antenna Cables found

View related parts
2010 Chevrolet Colorado Harness
Part Number: 25967014
$70.37 MSRP: $127.35
You Save: $56.98 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Replaces: 15107800, 15834698
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.3 x 13.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25967014
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Cable
Part Number: 20929430
$51.85 MSRP: $97.40
You Save: $45.55 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Mobile Telephone Antenna
- Replaces: 15859661, 25860400
- Item Weight: 0.60 Pounds
- Item Dimensions: 13.1 x 12.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20929430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Cable
Part Number: 25860403
$47.47 MSRP: $89.15
You Save: $41.68 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 15859663
- Item Weight: 0.90 Pounds
- Item Dimensions: 13.7 x 13.2 x 3.4 inches
- Condition: New
- SKU: 25860403
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Cable
Part Number: 20929427
$45.61 MSRP: $85.66
You Save: $40.05 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Item Weight: 0.90 Pounds
- Item Dimensions: 14.2 x 13.6 x 3.6 inches
- Condition: New
- SKU: 20929427
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Colorado Submodels:
- LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Cable
Part Number: 15791898
$34.15 MSRP: $60.98
You Save: $26.83 (44%)
Product Specifications
- Other Name: Cable, Radio Antenna
- Replaces: 15222896
- Item Weight: 0.90 Pounds
- Item Dimensions: 14.2 x 13.9 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15791898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Colorado Antenna Cable
Part Number: 97246052
Product Specifications
- Other Name: Cable Assembly-Radio Antenna; Cable; Cable, Radio Antenna
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 6.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97246052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Colorado Antenna Cable

With a comprehensive array of OEM 2010 Chevrolet Colorado Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Colorado Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Colorado Antenna Cable Parts Questions & Experts Answers

Q: How to replace the digital radio antenna cable on 2010 Chevrolet Colorado?
A: When replacing the Digital Radio Antenna Cable start by performing Mobile Telephone and Navigation Antenna Coaxial Cable Replacement (UE1, U2K) for vehicles that have OnStar(R). Begin by dropping down the front section of the headliner to reach the digital radio antenna connectors before removing these cords. Separate the 2 upper coax cable retainers from the header panel while also removing the 3 coax cable retainers from the windshield pillar. Lower the compartment door all the way down until you can disconnect the digital receiver extension cable from its receiver location. Remove the retainers from the I/P section of the vehicle then disconnect all electrical elements. Use a mechanics wire to attach to the coax cable's end before detaching the retainer from the I/P. Pull upward on the cable from behind the I/P to free it while leaving the mechanics wire in place. The mechanics wire from the existing coax cable should be fastened to its terminal before pulling downward for I/P positioning. The coax cable retainers need to be mounted on the hinge pillar and I/P. Install the digital receiver extension cable by connecting it to the receiver then securing retainers to the I/P before plugging in the electrical connector. The I/P compartment door must close while technicians should perform antenna connector connections to the windshield pillar. To complete the installation process you need to fasten the 2 upper coax cable retainers to the header panel before you set the headliner in place.