OEM 2010 Chevrolet Corvette Camshaft Position Sensor

2010 Chevrolet Corvette Parts Questions & Experts Answers

• Q: How to replace the Camshaft Position Sensor on 2010 Chevrolet Corvette?

  A: Replace the Camshaft Position Sensor by starting with generator bracket assembly removal. Remove the Camshaft Position Sensor mounting bolts from the front cover before removing the Camshaft Position Sensor assembly (4, 5, 6). The vehicle requires disconnection of its Camshaft Position Sensor jumper harness followed by engine harness electrical connectors before extracting the sensor assembly (4, 5, 6) and removing the Camshaft Position Sensor from its jumper harness. The installation process begins with sensor camshaft and jumper harness reconnection followed by o-ring installation on the camshaft sensor assembly (4 and 5). When installing the Camshaft Position Sensor assembly (4, 5, and 6) with the engine harness connector apply a bit of clean motor oil on the o-ring before locking everything into place. The front cover receives the Camshaft Position Sensor assembly (4, 5, and 6). Install the mounting bolts for the sensor subsequently tightening them to 25 nm (18 lb ft). Finally, install the generator assembly.