How to replace the knock sensor on Bank 1 on 2010 Chevrolet Corvette?

The replacement process for bank 1 Knock Sensor begins by disconnecting the battery's negative terminal. The next step involves removing both the Catalytic Converter on the vehicle's left side and the left Exhaust Manifold. Start by detaching the Knock Sensor's mounting bolt then disconnect its engine harness electrical connector. The engine block holds the Knock Sensor which needs to be extracted after the sensor's removal. The Knock Sensor mounting bolt needs installation onto the engine block following sensor placement while the mechanic tightens it to 25 nm (18 lb ft). Reconnect engine harness to Knock Sensor electrical connector before mounting the component on the engine block. Reinstall the left Exhaust Manifold then place back the left Catalytic Converter. Last, reconnect the negative Battery Cable.

OEM 2010 Chevrolet Corvette Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2010 Chevrolet Corvette Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Knock Sensor

With a comprehensive array of OEM 2010 Chevrolet Corvette Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the knock sensor on Bank 1 on 2010 Chevrolet Corvette?
A: The replacement process for bank 1 Knock Sensor begins by disconnecting the battery's negative terminal. The next step involves removing both the Catalytic Converter on the vehicle's left side and the left Exhaust Manifold. Start by detaching the Knock Sensor's mounting bolt then disconnect its engine harness electrical connector. The engine block holds the Knock Sensor which needs to be extracted after the sensor's removal. The Knock Sensor mounting bolt needs installation onto the engine block following sensor placement while the mechanic tightens it to 25 nm (18 lb ft). Reconnect engine harness to Knock Sensor electrical connector before mounting the component on the engine block. Reinstall the left Exhaust Manifold then place back the left Catalytic Converter. Last, reconnect the negative Battery Cable.

Related 2010 Chevrolet Corvette Parts

Alternate Year Models

2009 Chevrolet Corvette Knock Sensor 2011 Chevrolet Corvette Knock Sensor