How to replace the Lash Adjusters on 2010 Chevrolet Corvette?

Before replacing the valve lifters you must first remove the Cylinder Head and take out both guide bolts (211) and guides (210) along with the lifters while documenting the original guide position because the notched area must fit with the locating tab on the block. After removing the valve lifters (209) from the guide (210) mark all components for reinstallation to their exact previous positions. Before valve lifter installation pour clean engine oil into both valve lifters (209) and engine block lifter bores then push the lifters fully into the lifter guides (210) where the lifter flat surface matches the guide flat surface. Insert all valve lifters and guides (210) against the engine block while obeying fastener cautions and set in place the valve lifter guide bolts (211) at 10 nm (89 lb in). Finally, reinstall the Cylinder Head.

OEM 2010 Chevrolet Corvette Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2010 Chevrolet Corvette Valve Lifters
Part Number: 17122490
$38.65 MSRP: $60.54
You Save: $21.89 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
- Replaces: 05234670, 5234670
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.0 x 3.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17122490
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Lash Adjuster

With a comprehensive array of OEM 2010 Chevrolet Corvette Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Lash Adjuster Parts Questions & Experts Answers

Q: How to replace the Lash Adjusters on 2010 Chevrolet Corvette?
A: Before replacing the valve lifters you must first remove the Cylinder Head and take out both guide bolts (211) and guides (210) along with the lifters while documenting the original guide position because the notched area must fit with the locating tab on the block. After removing the valve lifters (209) from the guide (210) mark all components for reinstallation to their exact previous positions. Before valve lifter installation pour clean engine oil into both valve lifters (209) and engine block lifter bores then push the lifters fully into the lifter guides (210) where the lifter flat surface matches the guide flat surface. Insert all valve lifters and guides (210) against the engine block while obeying fastener cautions and set in place the valve lifter guide bolts (211) at 10 nm (89 lb in). Finally, reinstall the Cylinder Head.