How to replace the Fuse Box on 2010 Chevrolet Impala?

Begin the replacement of the accessory wiring junction block by taking off the electrical center cover followed by disconnecting the positive Battery Cable from the junction box. The next step includes removing the fasteners that secure the electrical center board after which the tabs on the board need to be unlocked before lifting up the board. First remove the fasteners which maintain the electrical center bracket attached to the vehicle. Start by attaching the electrical center to the vehicle through fasteners while tightening them until they reach 10 nm (86 lb in). Install the fasteners for the electrical center board and tighten them to 7 nm (62 lb in). The positive terminal needs connection followed by placing the electrical center cover in position.

OEM 2010 Chevrolet Impala Fuse Box

Fuse Holder Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuse Boxes found

View related parts
2010 Chevrolet Impala Fuse Box
Part Number: 20817316
Product Specifications
- Other Name: Block Assembly-Accessory Wiring Junction; Junction Boxes
- Replaces: 15803179, 25915390, 25790584, 15902278
- Item Weight: 2.90 Pounds
- Item Dimensions: 9.5 x 5.6 x 12.1 inches
- Condition: New
- SKU: 20817316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- Police | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Chevrolet Impala Fuse Box
Part Number: 84234963
Product Specifications
- Other Name: Block Assembly-Accessory Wiring Junction; Junction Boxes; Block, Main Wiring Junction And Fuse Block
- Replaces: 20817314
- Item Weight: 6.50 Pounds
- Item Dimensions: 12.2 x 9.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84234963
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX

2010 Chevrolet Impala Fuse Box

With a comprehensive array of OEM 2010 Chevrolet Impala Fuse Box, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Fuse Box are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Fuse Box Parts Questions & Experts Answers

Q: How to replace the Fuse Box on 2010 Chevrolet Impala?
A: Begin the replacement of the accessory wiring junction block by taking off the electrical center cover followed by disconnecting the positive Battery Cable from the junction box. The next step includes removing the fasteners that secure the electrical center board after which the tabs on the board need to be unlocked before lifting up the board. First remove the fasteners which maintain the electrical center bracket attached to the vehicle. Start by attaching the electrical center to the vehicle through fasteners while tightening them until they reach 10 nm (86 lb in). Install the fasteners for the electrical center board and tighten them to 7 nm (62 lb in). The positive terminal needs connection followed by placing the electrical center cover in position.

Related 2010 Chevrolet Impala Parts

Alternate Year Models

2009 Chevrolet Impala Fuse Box 2011 Chevrolet Impala Fuse Box