How to replace the Camshaft Position Sensor on 2010 Chevrolet Impala?

Before installing a new Camshaft Position Sensor, take off the Power Steering Pump. Take off the cmp sensor's bolt, followed by the cmp sensor, after you disconnect its electrical connector. If you're not changing the sensor, check the o-ring for any signs of wear, cracks, or leaks. When the o-ring is damaged, change it and lightly grease the new o-ring with engine oil before putting the cmp sensor in. After fitting the cmp sensor bolt and tightening it to 10 nm (89 lb in), go ahead and connect the cmp sensor's electrical connector. In the end, put the Power Steering Pump back into place.

OEM 2010 Chevrolet Impala Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2010 Chevrolet Impala Camshaft Position Sensor
Part Number: 12596663
$27.09 MSRP: $50.88
You Save: $23.79 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12596663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX

2010 Chevrolet Impala Camshaft Position Sensor

With a comprehensive array of OEM 2010 Chevrolet Impala Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on 2010 Chevrolet Impala?
A: Before installing a new Camshaft Position Sensor, take off the Power Steering Pump. Take off the cmp sensor's bolt, followed by the cmp sensor, after you disconnect its electrical connector. If you're not changing the sensor, check the o-ring for any signs of wear, cracks, or leaks. When the o-ring is damaged, change it and lightly grease the new o-ring with engine oil before putting the cmp sensor in. After fitting the cmp sensor bolt and tightening it to 10 nm (89 lb in), go ahead and connect the cmp sensor's electrical connector. In the end, put the Power Steering Pump back into place.

Related 2010 Chevrolet Impala Parts

Alternate Year Models

2009 Chevrolet Impala Camshaft Position Sensor 2011 Chevrolet Impala Camshaft Position Sensor