How to replace the Crankshaft Position Sensor on 2010 Chevrolet Impala?

Vehicle-specific tasks begin with properly raising and supporting the vehicle before starting sensor replacement work. To start the Crankshaft Position (CKP) sensor replacement process disconnect the electrical connector and remove both the sensor stud and the CKP sensor. The replacement procedure needs clean engine oil to lubricate the O-ring of the CKP sensor before you begin installation. Secure the CKP sensor stud by tightening it to 10 Nm (89 lb in). Complete the procedure by reconnecting the CKP sensor electrical connector then lowering the vehicle.

OEM 2010 Chevrolet Impala Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2010 Chevrolet Impala Crankshaft Position Sensor
Part Number: 12598208
$24.03 MSRP: $45.12
You Save: $21.09 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Replaces: 12591007
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 2.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12598208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2010 Chevrolet Impala Crankshaft Position Sensor

With a comprehensive array of OEM 2010 Chevrolet Impala Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2010 Chevrolet Impala?
A: Vehicle-specific tasks begin with properly raising and supporting the vehicle before starting sensor replacement work. To start the Crankshaft Position (CKP) sensor replacement process disconnect the electrical connector and remove both the sensor stud and the CKP sensor. The replacement procedure needs clean engine oil to lubricate the O-ring of the CKP sensor before you begin installation. Secure the CKP sensor stud by tightening it to 10 Nm (89 lb in). Complete the procedure by reconnecting the CKP sensor electrical connector then lowering the vehicle.

Related 2010 Chevrolet Impala Parts

Alternate Year Models

2009 Chevrolet Impala Crankshaft Position Sensor 2011 Chevrolet Impala Crankshaft Position Sensor