How to replace the Camshaft Position Sensor on 2009 Chevrolet Impala?

The first step for Camshaft Position Sensor replacement requires removal of the Power Steering Pump. Remove the cmp sensor electrical connector from the camshaft position then remove the cmp sensor bolt followed by the sensor. Check the sensor o-ring for damage and inspect for signs of wear as well as cracks or leakage only when you do not plan to replace the sensor. Before installing the cmp sensor apply clean engine oil to the new o-ring which must be replaced if it shows damage. The installation of the cmp sensor bolt must be secured at 10 nm (89 lb in) followed by reconnecting the cmp sensor electrical connector. Reposition the Power Steering Pump at the end of the procedure.

OEM 2009 Chevrolet Impala Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2009 Chevrolet Impala Camshaft Position Sensor
Part Number: 12596663
$27.09 MSRP: $50.88
You Save: $23.79 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12596663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX
View related parts
2009 Chevrolet Impala Camshaft Position Sensor
Part Number: 12593229
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 3.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12593229
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Impala Submodels:
- SS | 8 Cyl 5.3 L GAS

2009 Chevrolet Impala Camshaft Position Sensor

With a comprehensive array of OEM 2009 Chevrolet Impala Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Impala Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on 2009 Chevrolet Impala?
A: The first step for Camshaft Position Sensor replacement requires removal of the Power Steering Pump. Remove the cmp sensor electrical connector from the camshaft position then remove the cmp sensor bolt followed by the sensor. Check the sensor o-ring for damage and inspect for signs of wear as well as cracks or leakage only when you do not plan to replace the sensor. Before installing the cmp sensor apply clean engine oil to the new o-ring which must be replaced if it shows damage. The installation of the cmp sensor bolt must be secured at 10 nm (89 lb in) followed by reconnecting the cmp sensor electrical connector. Reposition the Power Steering Pump at the end of the procedure.

Related 2009 Chevrolet Impala Parts

Alternate Year Models

2008 Chevrolet Impala Camshaft Position Sensor 2010 Chevrolet Impala Camshaft Position Sensor