How to replace the right side exhaust manifold on a V6 engine on 2010 Chevrolet Silverado 1500?

The replacement process for right side Exhaust Manifold (V6) requires the removal of heated Oxygen Sensor (HO2S). First lower the vehicle by removing its Catalytic Converter to Exhaust Manifold nuts before starting. Start by removing the Exhaust Manifold heat shield bolts while simultaneously taking out the shield material and finally extracting the spark plugs from their positions. Before removing the Exhaust Manifold bolts users should position Spark Plug Wires away from the working area. You should then extract the Exhaust Manifold along with gaskets which need to be thrown out. The Exhaust Manifold to Catalytic Converter seal also needs removal before discarding the item. The installation of the Exhaust Manifold using a new Exhaust Manifold to Catalytic Converter seal starts with placing the new seal into the Exhaust Manifold before applying torque to the Exhaust Manifold studs on the Catalytic Converter. Install the new Exhaust Manifold gaskets in between the manifold and the Cylinder Head but align them according to fastener caution recommendations. Install all Exhaust Manifold bolts and stud components while applying torque of 30 nm (22 lb ft) to them. Reinstall the spark plugs while setting the Exhaust Manifold heat shield to the manifold followed by bolt installation and applying torque at 9 nm (80 lb in). Lift the vehicle before you put the Catalytic Converter in position with its manifold nuts and torque them to 50 nm (37 lb ft) before you lower the car.

OEM 2010 Chevrolet Silverado 1500 Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Manifolds found

View related parts
2010 Chevrolet Silverado 1500 Exhaust Manifold, Driver Side
Part Number: 12616285
$117.36 MSRP: $171.88
You Save: $54.52 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Replaces: 12602037, 12562235, 12571678, 12564155
- Item Weight: 10.30 Pounds
- Item Dimensions: 9.7 x 8.2 x 24.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12616285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Exhaust Manifold, Passenger Side
Part Number: 12592083
$188.58 MSRP: $256.30
You Save: $67.72 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold
- Position: Passenger Side
- Item Weight: 13.70 Pounds
- Item Dimensions: 22.1 x 12.6 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12592083
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LS, WT | 6 Cyl 4.3 L GAS
View related parts
2010 Chevrolet Silverado 1500 Exhaust Manifold, Driver Side
Part Number: 12592082
$179.14 MSRP: $246.00
You Save: $66.86 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold
- Position: Driver Side
- Item Weight: 12.20 Pounds
- Item Dimensions: 22.4 x 12.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12592082
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LS, WT | 6 Cyl 4.3 L GAS
View related parts
2010 Chevrolet Silverado 1500 Exhaust Manifold
Part Number: 12677665
$199.07 MSRP: $338.92
You Save: $139.85 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Replaces: 12648339
- Item Weight: 14.40 Pounds
- Item Dimensions: 9.2 x 5.3 x 25.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12677665
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2010 Chevrolet Silverado 1500 Exhaust Manifold

With a comprehensive array of OEM 2010 Chevrolet Silverado 1500 Exhaust Manifold, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Silverado 1500 Exhaust Manifold are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Silverado 1500 Parts Questions & Experts Answers

Q: How to replace the right side exhaust manifold on a V6 engine on 2010 Chevrolet Silverado 1500?
A: The replacement process for right side Exhaust Manifold (V6) requires the removal of heated Oxygen Sensor (HO2S). First lower the vehicle by removing its Catalytic Converter to Exhaust Manifold nuts before starting. Start by removing the Exhaust Manifold heat shield bolts while simultaneously taking out the shield material and finally extracting the spark plugs from their positions. Before removing the Exhaust Manifold bolts users should position Spark Plug Wires away from the working area. You should then extract the Exhaust Manifold along with gaskets which need to be thrown out. The Exhaust Manifold to Catalytic Converter seal also needs removal before discarding the item. The installation of the Exhaust Manifold using a new Exhaust Manifold to Catalytic Converter seal starts with placing the new seal into the Exhaust Manifold before applying torque to the Exhaust Manifold studs on the Catalytic Converter. Install the new Exhaust Manifold gaskets in between the manifold and the Cylinder Head but align them according to fastener caution recommendations. Install all Exhaust Manifold bolts and stud components while applying torque of 30 nm (22 lb ft) to them. Reinstall the spark plugs while setting the Exhaust Manifold heat shield to the manifold followed by bolt installation and applying torque at 9 nm (80 lb in). Lift the vehicle before you put the Catalytic Converter in position with its manifold nuts and torque them to 50 nm (37 lb ft) before you lower the car.