How to replace the canister purge valves on 2010 Chevrolet Silverado 1500?

To replace the evaporative emission canister purge solenoid valve one has to start by removing the air cleaner outlet resonator. Next, remove the evaporation (EVAP) canister purge solenoid valve tube quick connect fitting from the evaporate purge solonoid valve and relocate it, next tube out of the way. After that, unplug the engine wiring harness electrical connector from the evap purge valve solenoid. However, remove the bolt of the evap canister purge solenoid valve and take out the evap canister purge solenoid valve from upper Intake Manifold, take out the o-ring seal. For installation, lightly lubricate the o-ring seal with fresh engine oil to make the activity easier, and then fitting the evap canister purge solenoid valve into the upper Intake Manifold. Bolt the evap canister purge solenoid valve in position and tighten 10nm (89 lb in). It has been pointed out thatcareless failure to replace these warranted electrical connectors with compatible upgrade functional connectors for engine wiring harness may result in electrical connections between evap purge valve solenoid, evap canister purge solenoid tube, as well as tube quick connectors that are still suitable for usage. Lastly, replace the air cleaner outlet resonator.

OEM 2010 Chevrolet Silverado 1500 Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Canister Purge Valves found

View related parts
2010 Chevrolet Silverado 1500 Solenoid Valve, Green Line
Part Number: 12597567
$35.29 MSRP: $66.28
You Save: $30.99 (47%)
ADD TO CART
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids; Purge Valve; Purge Valve; Purge Solenoid; Purge Control Valve; Solenoid
- Replaced by: 12735397
- Replaces: 12606684, 12597566, 12570469, 12597341
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.2 x 2.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12597567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 PCV Valve
Part Number: 12608378
$32.83 MSRP: $58.62
You Save: $25.79 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Purge Valve; Purge Solenoid; Purge Control Valve
- Replaced by: 12735400
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.5 x 7.3 x 5.1 inches
- Condition: New
- SKU: 12608378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LS, WT | 6 Cyl 4.3 L GAS
View related parts
2010 Chevrolet Silverado 1500 Purge Solenoid
Part Number: 25811774
$65.44 MSRP: $116.86
You Save: $51.42 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly for Evaporator Emission Canister; includes Purge and Vent Solenoids.
- Item Weight: 1.50 Pounds
- Item Dimensions: 29.4 x 4.3 x 28.3 inches
- Condition: New
- SKU: 25811774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Purge Solenoid
Part Number: 15921549
$65.44 MSRP: $116.86
You Save: $51.42 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly for Evaporator Emission Canister; includes Purge and Vent Solenoids.
- Item Weight: 0.90 Pounds
- Item Dimensions: 29.7 x 4.5 x 27.2 inches
- Condition: New
- SKU: 15921549
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2010 Chevrolet Silverado 1500 Purge Solenoid
Part Number: 25811775
Product Specifications
- Other Name: Solenoid Assembly for Evaporator Emission Canister; includes Purge and Vent Solenoids.; Solenoid
- Replaces: 15813531
- Item Weight: 1.50 Pounds
- Item Dimensions: 29.1 x 4.4 x 27.0 inches
- Condition: New
- SKU: 25811775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Silverado 1500 Submodels:
- Hybrid, WT | 6 Cyl 4.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

2010 Chevrolet Silverado 1500 Canister Purge Valves

With a comprehensive array of OEM 2010 Chevrolet Silverado 1500 Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Silverado 1500 Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Silverado 1500 Parts Questions & Experts Answers

Q: How to replace the canister purge valves on 2010 Chevrolet Silverado 1500?
A: To replace the evaporative emission canister purge solenoid valve one has to start by removing the air cleaner outlet resonator. Next, remove the evaporation (EVAP) canister purge solenoid valve tube quick connect fitting from the evaporate purge solonoid valve and relocate it, next tube out of the way. After that, unplug the engine wiring harness electrical connector from the evap purge valve solenoid. However, remove the bolt of the evap canister purge solenoid valve and take out the evap canister purge solenoid valve from upper Intake Manifold, take out the o-ring seal. For installation, lightly lubricate the o-ring seal with fresh engine oil to make the activity easier, and then fitting the evap canister purge solenoid valve into the upper Intake Manifold. Bolt the evap canister purge solenoid valve in position and tighten 10nm (89 lb in). It has been pointed out thatcareless failure to replace these warranted electrical connectors with compatible upgrade functional connectors for engine wiring harness may result in electrical connections between evap purge valve solenoid, evap canister purge solenoid tube, as well as tube quick connectors that are still suitable for usage. Lastly, replace the air cleaner outlet resonator.