How to replace the Front Cross-Member for both 2WD and 4WD on 2011 GMC Canyon?

In order to replace the transmission support crossmember for 2wd and 4wd, it is necessary to lift the vehicle and properly fix the transmission with a suitable steering or stand/jack. For 2wd, pull off nuts to keep the transmission mount on the transmission support, and lift the transmission. Next, pull out the vertical bolts and horizontal nuts and bolts that hold the transmission support to the frame. For installation, set the transmission support back in its place and hook the horizontal nuts and bolts, then the vertical bolts. Tighten horizontal nuts to 50 n.m (37 lb.ft) and vertical bolts 100 n.m (74 lb ft). Reduce the transmission and tighten nuts to the transmission mount before lifting vehicle or taking out the stand or jack and lowering the vehicle. For 4 wd follow the same first steps but once you lift the transmission there are nuts that hold the transmission mount to the transmission support, remove these nuts and then follow an identical removal and installation as in the 2wd section.

OEM 2011 GMC Canyon Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Front Cross-Members found

View related parts
2011 GMC Canyon Trans Crossmember Part Number: 15076524
$233.39
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Crossmember; Crossmember, Transmission Mounting
- Item Weight: 23.50 Pounds
- Item Dimensions: 49.0 x 6.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15076524
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2011 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2011 GMC Canyon Crossmember Part Number: 15163518
$173.11 MSRP: $258.82
You Save: $85.71 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember, Frame Bell Housing (Attaches To Frame Andside Rails); Crossmember, Frame Bell Housing(Attaches To Frame And Side Rails)
- Position: Front
- Item Weight: 4.30 Pounds
- Item Dimensions: 19.1 x 12.4 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15163518
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2011 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2011 GMC Canyon Trans Crossmember Part Number: 15076525
$244.71 MSRP: $385.03
You Save: $140.32 (37%)
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Crossmember, Transmission Mounting
- Item Weight: 19.70 Pounds
- Item Dimensions: 48.2 x 5.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15076525
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2011 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2011 GMC Canyon Front Cross-Member

With a comprehensive array of OEM 2011 GMC Canyon Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2011 GMC Canyon Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2011 GMC Canyon Front Cross-Member Parts and Q&A

Q: How to replace the Front Cross-Member for both 2WD and 4WD on 2011 GMC Canyon?
A: In order to replace the transmission support crossmember for 2wd and 4wd, it is necessary to lift the vehicle and properly fix the transmission with a suitable steering or stand/jack. For 2wd, pull off nuts to keep the transmission mount on the transmission support, and lift the transmission. Next, pull out the vertical bolts and horizontal nuts and bolts that hold the transmission support to the frame. For installation, set the transmission support back in its place and hook the horizontal nuts and bolts, then the vertical bolts. Tighten horizontal nuts to 50 n.m (37 lb.ft) and vertical bolts 100 n.m (74 lb ft). Reduce the transmission and tighten nuts to the transmission mount before lifting vehicle or taking out the stand or jack and lowering the vehicle. For 4 wd follow the same first steps but once you lift the transmission there are nuts that hold the transmission mount to the transmission support, remove these nuts and then follow an identical removal and installation as in the 2wd section.