Other Name: Handle Assembly-Automatic Transmission Control Lever *Cashmere E; Automatic Transmission Selector Handle; Handle, Transmission Control Lever
Q: How to replace the Automatic Transmission Shifter on Buick LaCrosse?
A: The first step to replacing the automatic transmission shift lever requires sir system disabling before moving the shift lever seal onto the lever shaft. You should start by removing steering column trim pieces as well as disconnecting the shift lever connector found at the column base. Pull away the shift lever screw from the shift lever assembly while extracting both the shift lever and the seal through the linear shift assembly. Ensure the shift lever seal removal occurs by sliding it towards the narrow end of the shift lever. The shift lever seal must be positioned at the narrow end of the shift lever assembly before installation onto the linear shift assembly. Insert the shift lever screw into the shift lever assembly while tightening it to 20 nm (15 ft. Lbs.). Position the shift lever seal downward along the shift lever assembly until it matches with the steering column trim covers. After reassembling the steering column trim covers you can enable the sir system.
Q: How to replace the Automatic Transmission Shifter on Buick Regal?
A: When replacing an a/t shift lever you must begin by taking out steering column trim covers while rolling back the shift lever boot. The first step involves removing the shift lever screw before proceeding to extract the shift lever assembly followed by removal of the shift lever seal from this assembly. Start your installation steps by setting the shift lever seal onto the shift lever assembly followed by securing it with the shift lever screw tightened to 1.5 nm (13 lb in). The installation process requires proper seating of the shift lever boot inside the trim covers before reinstalling the steering column trim covers.