Other Name: Motor, Front Side Door Window Regulator; Motor & Drive; Front Door Window Regulator; Rear Door Window Regulator; Quarter Window Regulator; Front Seat Adjuster.
Other Name: Motor Kit, Rear Side Door Window Regulator (Right-Hand); Motor; Motor Kit, Front Door Window Regulator; Motor Kit, Rear Door Window Regulator
Position: Rear Passenger Side
Replaces: 88951546, 10308104, 10308106
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
Other Name: Motor Kit, Front Door Window Regulator; Window Motor
Position: Front Driver Side
Replaces: 10304913, 88951545
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
Buick Century Window Motor
Our website offers an extensive catalog of genuine Buick Century Window Motor at unbeatable prices. Every OEM Buick Century Window Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Century Window Motor Parts Questions & Experts Answers
Q: How to replace the front or rear door window motor on Buick Century?
A: You need to take away the door trim panel as your first step when changing the front or rear door Window Motor. The power Window Motor gets easier access through positioning the water deflector so you can remove its door mounting screws before disconnecting the motor electrical connector. Kennedy motors encourages users to remove the screws holding the motor to the door and guide the motor assembly into the door opening to remove the motor-to-window regulator mounting screws. Install a new power Window Motor along with a door mounting bracket onto the window regulator by fastening the screws to 6 nm (53 lb in). After fastening the motor electrical connector reposition the motor to the door by installing the mounting screws with 10 nm (89 lb in) torque then replace the water deflector on the door. The installation requires you to discard the old door trim panel retainers as you install new retainers before putting on the door trim panel. The conclusion of installation involves placing the new retainers on the door trim panel followed by installing both components and checking the power window functions.