How to adjust the Cruise Control Switch without depressing the brake pedal on Buick LeSabre?

Do not push the pedal while handling the cruise release switch during adjustment procedures. Begin by seating the release switch fully against the Brake Pedal arm inside the retainer then turn the switch to secure it in place. Measure the length between the switch barrel's end point and the pedal arm with a standard of 1.5 mm to 1.7 mm (1/16 in). The insertion and locking process needs reiteration when the desired distance measurements aren't achieved. The Brake Pedal travel should range from 3.5 mm to 12.5 mm (1/8 in to 1/2 in) at the centerline of the Brake Pedal assembly where nominal actuation of the release assembly contacts should happen at 4.5 mm (3/16 in).

How to Replace a Cruise Control Switch on Buick LeSabre?

Begin switch replacement for Cruise Control by removing the steering wheel control assembly with a flat-bladed screwdriver before disconnecting the wire connector to take out the control. The wire connector serves first for installation before aligning the control then pressing the control into place.

OEM Buick LeSabre Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Cruise Control Switches found

View related parts
Buick LeSabre Multifunction Switch Part Number: 25111261
$124.57 MSRP: $232.46
You Save: $107.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Lever, Transmission Control Lever; Multi Purpose Switch; Engagement Switch; Lever
- Replaced by: 19353956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Buick LeSabre | Base, Collector's Edition, Custom, Estate Wagon, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Cruise Switch Part Number: 25756503
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Brake Switch Part Number: 25669178
Product Specifications
- Other Name: Switch, Cruise Control; Pedal Switch; Release Switch; Switch; Switch, Electronic Brake Control; Switch, Transmission Converter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Vacuum Switch Part Number: 25551820
Product Specifications
- Other Name: Valve, Cruise Control; Control Switch; Pedal Switch; Electronic Brake Control; Transmission Converter Valve; Cruise Control Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Check Valve Part Number: 1645516
Product Specifications
- Other Name: Valve, Cru; Control Valve; Dump Valve; Vacuum Release Valve; Transmission Converter Switch; Cruise Control Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Brake Switch Part Number: 12450039
Product Specifications
- Other Name: Switch, Cruise Control; Vacuum Switch; Control Switch; Pedal Switch; Release Switch; Electronic Brake Control; Transmission Converter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch Part Number: 25756504
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Cashmere E; Switch, Cruise Control Selector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Gray Part Number: 12451311
Product Specifications
- Other Name: Switch, Cruise Control Selector; Engagement Switch
- Replaces: 12451003
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Red Part Number: 12451309
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Replaces: 12450172
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Blue Part Number: 12451307
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Replaces: 12450154
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Charcoal Part Number: 12451306
Product Specifications
- Other Name: Switch, Cruise Control Selector; Engagement Switch
- Replaces: 12450151
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Gray Part Number: 12451253
Product Specifications
- Other Name: Switch, Cruise Control Selector; Set/Resume Switch
- Replaces: 12451004
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Red Part Number: 12451251
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Set/Resume Switch Part Number: 12451250
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Replaces: 12450219
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Blue Part Number: 12451249
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Replaces: 12450218
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cruise Switch, Charcoal Part Number: 12451248
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS

Buick LeSabre Cruise Control Switch

Want to cut long-term maintenance and repair costs? Choose OEM Cruise Control Switch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Cruise Control Switch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick Lesabre Cruise Control Switch serves as a crucial device because it enables drivers to preserve a steady speed through automatic speed regulation without needing to touch the accelerator pedal. A renowned component of Buick Lesabre that provides reliable performance allows the engine computer to control speed setting and adjustments and speed resumption thereby improving driving efficiency and safety. This Cruise Control switch functions with multiple Buick Lesabre models to provide smooth operation of the feature thus becoming an essential mechanical component of the vehicle. The Buick Lesabre uses a Cruise Control Switch as one of its main features because it allows users to drive for longer periods at steady speed while increasing comfort and saving fuel. Special features of the Buick Lesabre Cruise Control Switch emerge from its user-friendly design and fast response which distinguish it among automotive competitors. Because of its fast speed modifying functionality combined with performance reliability the Cruise Control Switch becomes a popular selection for all the brand model vehicle owners. By demonstrating their dedication to quality and innovation the automaker presents the car Cruise Control Switch which delivers advanced features and safe efficient driving to its users.

Buick LeSabre Cruise Control Switch Parts and Q&A

Set/Resume Switch
12451250
Q: How to adjust the Cruise Control Switch without depressing the brake pedal on Buick LeSabre?
A:
Do not push the pedal while handling the cruise release switch during adjustment procedures. Begin by seating the release switch fully against the Brake Pedal arm inside the retainer then turn the switch to secure it in place. Measure the length between the switch barrel's end point and the pedal arm with a standard of 1.5 mm to 1.7 mm (1/16 in). The insertion and locking process needs reiteration when the desired distance measurements aren't achieved. The Brake Pedal travel should range from 3.5 mm to 12.5 mm (1/8 in to 1/2 in) at the centerline of the Brake Pedal assembly where nominal actuation of the release assembly contacts should happen at 4.5 mm (3/16 in).
Brake Switch
25669178
Q: How to Replace a Cruise Control Switch on Buick LeSabre?
A:
Begin switch replacement for Cruise Control by removing the steering wheel control assembly with a flat-bladed screwdriver before disconnecting the wire connector to take out the control. The wire connector serves first for installation before aligning the control then pressing the control into place.