How to replace the rack and pinion boot using the J22610 Keystone Clamp Pliers on Buick LeSabre?

Replace the Rack and Pinion Boot off the vehicle using the j22610 keystone clamp pliers (J22610). Start by removing the outer tie rod assembly and follow by unscrewing the hex jam nut on the inner tie rod first detach the tie rod end clamp from the Rack and Pinion Boot. Cut away the boot clamp with side cutters before disposal. The Rack and Pinion Boot needs removal from the Rack And Pinion gear assembly. Installation starts by affixing a new boot clamp onto the Rack and Pinion Boot and after applying grease to both the inner tie rod assembly and the Rack And Pinion gear assembly, position the new Rack and Pinion Boot on the inner tie rod assembly. Check for any shape abnormalities or twisting or puckering in the Rack and Pinion Boot before installation. Manual adjustment of the boot is needed before placing it into its proper position in the gear assembly. Use the j22610 to install the boot clamp on the Rack and Pinion Boot then crimp it. Lock down the Rack and Pinion Boot with pliers while installing the tie rod end clamp before putting back the hex jam nut to the inner tie rod assembly .

OEM Buick LeSabre Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack and Pinion Boots found

View related parts
Buick LeSabre Tie Rod Boot Part Number: 26035404
$248.28 MSRP: $390.65
You Save: $142.37 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Inner Tie Rod Boot; Boot Kit; Dust Seal; Outer Tie Rod Seal; Boots; Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2005 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Tie Rod Boot Part Number: 7843190
Product Specifications
- Other Name: Boot Kit, Steering Gear; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick LeSabre | Base, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

Buick LeSabre Rack and Pinion Boot

Want to cut long-term maintenance and repair costs? Choose OEM Rack and Pinion Boot. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LeSabre parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LeSabre Rack and Pinion Boot includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick LeSabre Rack and Pinion Boot part is an essential one that draws the ethos of durability and efficiency of the Buick LeSabre model widely known for its durability couple with effectiveness in engineering. This protective rubber boot is applied to protect the rack of the steering from dirt and contamination which may interfere with the working of the rack and pinion. Fitting into the upper and lower ends of the rack, Rack and Pinion Boot also makes a safe cover that helps to protect the mechanism from damages, which is critical for the vehicle's functionality and safety. Complementing the Buick LeSabre model automobiles manufactured between 1959 and 2005, this boot is specifically designed to perfectly fit with the vehicle and improve on its performance. This is because the Rack and Pinion Boot should be regularly checked and replaced if needs be to avoid a bad steering system that is dangerous when driving. Among all Buick LeSabre Rack and Pinion Boot available in auto shops, one can notice the sturdiness and durability of this product, which accurately conveys the idea of 'Quality is the brand's main priority". Through designs that make it possible for the part to last longer and work harder, this part is evidence of the Buick LeSabre's engineering. Therefore the Rack and Pinion Boot because of the role in the driving mechanism, increases the Buick LeSabre efficiency, ensures wellbeing of passengers, so it is vital component in the framework of car manufacturing.

Buick LeSabre Rack and Pinion Boot Parts Questions & Experts Answers

Tie Rod Boot
26035404
Q: How to replace the rack and pinion boot using the J22610 Keystone Clamp Pliers on Buick LeSabre?
A:
Replace the Rack And Pinion Boot off the vehicle using the j22610 keystone clamp pliers (J22610). Start by removing the outer tie rod assembly and follow by unscrewing the hex jam nut on the inner tie rod first detach the tie rod end clamp from the Rack and Pinion Boot. Cut away the boot clamp with side cutters before disposal. The Rack and Pinion Boot needs removal from the Rack And Pinion gear assembly. Installation starts by affixing a new boot clamp onto the Rack and Pinion Boot and after applying grease to both the inner tie rod assembly and the Rack And Pinion gear assembly, position the new Rack and Pinion Boot on the inner tie rod assembly. Check for any shape abnormalities or twisting or puckering in the Rack and Pinion Boot before installation. Manual adjustment of the boot is needed before placing it into its proper position in the gear assembly. Use the j22610 to install the boot clamp on the Rack and Pinion Boot then crimp it. Lock down the Rack and Pinion Boot with pliers while installing the tie rod end clamp before putting back the hex jam nut to the inner tie rod assembly .