ChevyParts
My Garage
My Account
Cart
OEM Buick Lucerne Automatic Transmission Filter
AT Filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Automatic Transmission Filters found
Buick Lucerne Filter
Part Number: 8681416$38.39 MSRP: $68.57You Save: $30.18 (45%)Ships in 1-3 Business Days
Buick Lucerne Filter Element
Part Number: 24227477$43.24 MSRP: $77.22You Save: $33.98 (44%)Ships in 1-3 Business Days
Buick Lucerne Automatic Transmission Filter
Our website offers an extensive catalog of genuine Buick Lucerne Automatic Transmission Filter at unbeatable prices. Every OEM Buick Lucerne Automatic Transmission Filter comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Lucerne Automatic Transmission Filter Parts Questions & Experts Answers
- Q: How to Replace the Automatic Transmission Filter and Fluid on Buick Lucerne?A: The replacement of automatic transmission fluid and filter starts with raising and supporting the vehicle. You should start by placing a drain pan under the transaxle Oil Pan then procede to carefully remove the front-side bolts of the Oil Pan while turning the rear bolts about four turns only. A rubber mallet does the job of loosening the Oil Pan by tapping it while the transmission fluid drains into a drain pan before you visually check the color of the fluid. You should remove all Oil Pan bolts before separating the Oil Pan from the gasket along with the Oil Pan itself. A long screwdriver enables users to free the oil filter neck from its seal so they can examine the oil filter seal for signs of wear and damage. Remove the Oil Pan Gasket through combination use of the j 6125-1b (J 6125-1B Slide Hammer) and j 23129 (J 23129 Universal Seal Remover). Before inserting a new seal into position apply a small amount of j 36850 (J 36850 Transmission Assembly Lubricant) or petroleum jelly. Then place the new filter into the case using existing Oil Pan gaskets unless the sealing surface has damage. The installation of Oil Pan and gasket must be done at once before tightening Oil Pan bolts to 14 n.m (125 lb in). Lower the vehicle while checking both transmission fluid level and Oil Pan Gasket for leaks. Complete the procedure by filling the transaxle to the proper levels.
