How to replace the outer CV Boot and CV Joint of the axle shaft assembly on Buick Park Avenue?

To replace the outer joint and boot of the Axle Shaft assembly, first using snap ring pliers (J 8059), take out the large boot retaining clamp from the cv joint and get rid of it, then the small boot retaining clamp from the halfshaft bar. My hind leg boots began to give out after about two weeks. They kept falling off, which slowed me down. Although my boots were new, the material and workmanship on them left much to be desired. Remove the cv joint assembly from the bar by wiping off the grease from the cv joint inner race and spreading the ears on the race retaining ring using the snap ring pliers (J 8059). Take away the boot from the bar and strike delicately on cv joint cage with a brass drift & hammer to take out all six chrome alloy balls from it. Clean out the inner and outer race assemblies, cv joint cage, balls, deeply with cleaning solvent, to ensure all the old grease and contaminants are expelled from the parts, and then dry the parts out. Desana - assemble by placing a new swage ring onto the small end of the joint boot and slide them onto to half shaft bar. Use the earred clamp tool (J 35910) and small swage tool (J 41048) to secure the boot and avoid pinch points. Assemble the small swage tool (J41048) bolts and tighten them alternately till snug and grease the ball grooves of the inner and outer races with grease from the service kit. Mount the inner race in the cage while making sure it is aligned correctly and then instal the cage and inner race into the outer race. Install the chrome balls, pack the cv joint with grease and drive the cv joint onto the halfshaftbar until the retaining ring is in place. Slide the big diameter of outboard boot over the cv-joint outer race and apply the boot retaining clamp with an earred clamp tool (J 35910), breaker bar , and a torque wrench to a spec 176 nm (130 Ft. Lbs), verify gap dimension of clamp ear for correct spec.

OEM Buick Park Avenue CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 CV Boots found

View related parts
Buick Park Avenue Boot Kit, Front
Part Number: 20984614
$36.52 MSRP: $92.67
You Save: $56.15 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Inner CV Joint Boot; Inner Boot; Boots
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Seal Kit, Front
Part Number: 26059842
Product Specifications
- Other Name: Boot Kit, Front Axle; CV Boot; CV Joint Boot Kit for Front Wheel Drive Axle Shaft; includes outer and inner seals.
- Position: Front
- Replaces: 26099016
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Axle Boots, Front
Part Number: 26030761
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Boot Kit; Outer CV Joint Boot; Inner Boot; Boots
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Seal Kit
Part Number: 26044380
Product Specifications
- Other Name: Boot, Front; Axle Seal; CV Boot; Boot Kit; Outer CV Joint Boot; Inner Boot; Outer Boot; Outer Boot Kit; Boots; Boot
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue CV Joint Boot Kit
Part Number: 26020951
Product Specifications
- Other Name: CV Boot; Boots
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Boot Kit, Front
Part Number: 26073372
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Inner Boot; Inner Boot Kit; Boots
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Boot Kit, Front
Part Number: 26060112
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Inner CV Joint Boot; Inner Boot; Boots
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Boot Kit, Front
Part Number: 26044386
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Inner Boot; Boots
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Boot Kit, Front
Part Number: 26044383
Product Specifications
- Other Name: Boot Kit, Front Axle; CV Boot; Outer CV Joint Boot; Outer Boot; Outer Boot Kit; Boots; Boot Kit, Front Wheel Drive Axle Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Axle Boots, Front
Part Number: 26030762
Product Specifications
- Other Name: Boot Kit, Front Axle; CV Boot; Boot Kit; Inner CV Joint Boot; Outer Boot; Boots; Boot Kit, Front Wheel Drive Axle Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Seal Kit, Front
Part Number: 26007428
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; Axle Seal; CV Boot; Axle Boots; Boot Kit; Inner CV Joint Boot; Inner Boot; Boots
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Seal Kit, Front
Part Number: 26001938
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Joint Boot Kit; includes axle boots, inner and outer seals for front wheel drive axle shaft.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue CV Boot

Our website offers an extensive catalog of genuine Buick Park Avenue CV Boot at unbeatable prices. Every OEM Buick Park Avenue CV Boot comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Park Avenue CV Boot Parts Questions & Experts Answers

Boot Kit, Front
20984614
Q: How to replace the outer CV Boot and CV Joint of the axle shaft assembly on Buick Park Avenue?
A: To replace the outer joint and boot of the Axle Shaft assembly, first using snap ring pliers (J 8059), take out the large boot retaining clamp from the cv joint and get rid of it, then the small boot retaining clamp from the halfshaft bar. My hind leg boots began to give out after about two weeks. They kept falling off, which slowed me down. Although my boots were new, the material and workmanship on them left much to be desired. Remove the cv joint assembly from the bar by wiping off the grease from the cv joint inner race and spreading the ears on the race retaining ring using the snap ring pliers (J 8059). Take away the boot from the bar and strike delicately on cv joint cage with a brass drift & hammer to take out all six chrome alloy balls from it. Clean out the inner and outer race assemblies, cv joint cage, balls, deeply with cleaning solvent, to ensure all the old grease and contaminants are expelled from the parts, and then dry the parts out. Desana - assemble by placing a new swage ring onto the small end of the joint boot and slide them onto to half shaft bar. Use the earred clamp tool (J 35910) and small swage tool (J 41048) to secure the boot and avoid pinch points. Assemble the small swage tool (J41048) bolts and tighten them alternately till snug and grease the ball grooves of the inner and outer races with grease from the service kit. Mount the inner race in the cage while making sure it is aligned correctly and then instal the cage and inner race into the outer race. Install the chrome balls, pack the cv joint with grease and drive the cv joint onto the halfshaftbar until the retaining ring is in place. Slide the big diameter of outboard boot over the cv-joint outer race and apply the boot retaining clamp with an earred clamp tool (J 35910), breaker bar , and a torque wrench to a spec 176 nm (130 Ft. Lbs), verify gap dimension of clamp ear for correct spec.

Related Buick Park Avenue Parts

Browse Buick Park Avenue CV Boot by Years

2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991