How to replace the Spark Plug Wires on Buick Park Avenue?

Starting the replacement of Spark Plug wires requires users to first switch off the ignition then take off the fuel injector sight shield. Begin the Spark Plug wire (2,4,6) replacement at the engine's rear by recording their positions then turning the plug boot 1/2 turn and using j 38491 (J 38491) to carefully lift the heat shield from the Spark Plug. Begin by performing this sequence again for the front Spark Plug wires (1,3,5) and follow it with a note of their placement then boot adjustment and heat shield separation with j 38491 (J 38491). The engine requires removal of Spark Plug wires from ignition coils followed by taking out Spark Plug wire retaining clips from rear, front and top locations before entirely extracting wires from engine. New Spark Plug wires installation requires moving essential components including boot heat shields and Spark Plug wire conduit and Spark Plug wire retaining clips. Nothing (2,4,6) is connected to the ignition coils then the Spark Plug wires should fit onto engine positions 1,3,5 which must lead to the front spark plugs followed by engine positions 2,4,6 which should connect to rear spark plugs after reattaching the fuel injector sight shield.

Are Spark Plug Wires Essential for Proper Engine Operation and How Should They Be Inspected on Buick Park Avenue?

Fueling proper engine operation depends on healthy spark plug wires so inspect them completely to pinpoint performance-affecting conditions. The first step should focus on checking that spark plug wires are properly routed since improper routing leads to cross-firing. Check every wire for split or cracked areas while inspecting boots for damage and terminal corrosion, arcing, carbon tracking, and tearing or piercing. Detection of corrosion or arcing or carbon tracking on spark plug wire boots or terminals requires immediate replacement of both the wire and the connected component.

OEM Buick Park Avenue Spark Plug Wires

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Spark Plug Wires found

View related parts
Buick Park Avenue Cable Set Part Number: 19154586
$35.92 MSRP: $110.64
You Save: $74.72 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12192048
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1998 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 19171849
$51.28 MSRP: $92.82
You Save: $41.54 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12192421, 12192159, 12192071
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 19154581
$45.50 MSRP: $98.48
You Save: $52.98 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Ignition Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12074087, 12074048
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12192471
$60.94 MSRP: $110.30
You Save: $49.36 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12192470
$45.71 MSRP: $98.96
You Save: $53.25 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Ignition Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12192189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 19171853
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Ignition Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12173547
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12073957
Product Specifications
- Other Name: Wire, Spark Plug Or Coil; Spark Plug Wire; Cable
- Replaces: 12043636
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Part Number: 12073950
Product Specifications
- Other Name: Wire, Spark Plug Or Coil; Spark Plug Wire
- Replaces: 12074097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12036965
Product Specifications
- Other Name: Wire, Spark Plug Or Coil; Spark Plug Wire; Cable
- Replaces: 12053454, 12043634, 12074086, 12096401
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12073951
Product Specifications
- Other Name: Wire, Spark Plug Or Coil; Spark Plug Wire; Cable
- Replaces: 12096403
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12036970
Product Specifications
- Other Name: Wire, Spark Plug Or Coil; Spark Plug Wire; Cable
- Replaces: 12043637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12036967
Product Specifications
- Other Name: Wire, Spark Plug Or Coil; Spark Plug Wire; Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 12036964
Product Specifications
- Other Name: Wire, Spark Plug Or Coil; Spark Plug Wire; Cable
- Replaces: 12074085
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Cable Set Part Number: 19154580
$37.96 MSRP: $67.79
You Save: $29.83 (44%)
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 12074043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS

Buick Park Avenue Spark Plug Wires

Want to cut long-term maintenance and repair costs? Choose OEM Spark Plug Wires. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Spark Plug Wires includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Hence; the Buick Park Avenue Spark Plug Wires are critical parts that play a major role in the performance of Buick Park Avenue vehicles. Intended for transmitting high voltage from the ignition system to the engine cylinder heads these Spark Plug Wires ensure proper ignition of the fuel-air mixture in the cylinder for premier Engine performance. Quite popular for their potency, these Spark Plug Wires boast of thick, heat-proof insulation that will not allow arcing to happen, their lengths are right on the dot, and the metallic terminals are sure to create good connections. Hood also fits different models of Buick Park Avenue and models with the new 3800 OHV V6 engine proving the devices' functionality in maintaining the engine efficiency and safety. Also, the present-day circuits in Spark Plug Wires employ technologies to reduce interference to pervade the airwaves, and this boosts the performance of the automobile. To reduce the chances of corrosion, high-quality material like brass terminals are used, hence the device is very reliable. In this respect, the Buick Park Avenue, being a model that boasts of its heritage and opulence, can significantly reap the advantages of these Spark Plug Wires in keeping the automobile sturdy and reliable. Able to contribute to the automotive industry in the market today, the Buick Park Avenue Spark Plug Wires also symbolizes Buick's craft and dedication in providing quality and innovative products that is why every important Park Avenue owner should invest in this product.

Buick Park Avenue Spark Plug Wires Parts and Q&A

Cable Set
12192470
Q: How to replace the Spark Plug Wires on Buick Park Avenue?
A:
Starting the replacement of Spark Plug wires requires users to first switch off the ignition then take off the fuel injector sight shield. Begin the Spark Plug wire (2,4,6) replacement at the engine's rear by recording their positions then turning the plug boot 1/2 turn and using j 38491 (J 38491) to carefully lift the heat shield from the Spark Plug. Begin by performing this sequence again for the front Spark Plug wires (1,3,5) and follow it with a note of their placement then boot adjustment and heat shield separation with j 38491 (J 38491). The engine requires removal of Spark Plug wires from Ignition Coils followed by taking out Spark Plug wire retaining clips from rear, front and top locations before entirely extracting wires from engine. New Spark Plug wires installation requires moving essential components including boot heat shields and Spark Plug wire conduit and Spark Plug wire retaining clips. Nothing (2,4,6) is connected to the ignition coils then the Spark Plug wires should fit onto engine positions 1,3,5 which must lead to the front spark plugs followed by engine positions 2,4,6 which should connect to rear spark plugs after reattaching the fuel injector sight shield.
Cable Set
12192471
Q: Are Spark Plug Wires Essential for Proper Engine Operation and How Should They Be Inspected on Buick Park Avenue?
A:
Fueling proper engine operation depends on healthy spark plug wires so inspect them completely to pinpoint performance-affecting conditions. The first step should focus on checking that spark plug wires are properly routed since improper routing leads to cross-firing. Check every wire for split or cracked areas while inspecting boots for damage and terminal corrosion, arcing, carbon tracking, and tearing or piercing. Detection of corrosion or arcing or carbon tracking on spark plug wire boots or terminals requires immediate replacement of both the wire and the connected component.