Other Name: Switch, Turn Signal; Multi Purpose Switch; Turn Signal; Signal Switch; Switch; Switch, Turn Signal Lamp
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
Buick Regal Turn Signal Switch
Our website offers an extensive catalog of genuine Buick Regal Turn Signal Switch at unbeatable prices. Every OEM Buick Regal Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Regal Turn Signal Switch Parts Questions & Experts Answers
Q: How to replace the Turn Signal Switch and multifunction hazard switch on Buick Regal?
A: Begin the switch replacement of turn signal, turn signal and hazard by first ending sir system operation then disconnecting the negative Battery Cable. Start by removing the Steering Wheel combined with the steering column trim covers while removing the wire harness straps that connect to the wire harness assembly on the column. Extract the Turn Signal Switch assembly connectors from the sir coil assembly connector and pull them out of the steering column bulkhead connector. Unfasten the Turn Signal Switch assembly screws then extract the assembly from the steering column. A small flat-blade tool should compress the electrical contact while you position the Turn Signal Switch assembly onto the steering column so it rests on the turn signal canceling cam. Use a 7 nm (62 inch lbs.) torque when installing the Turn Signal Switch assembly screws to the Turn Signal Switch assembly. Attach the Turn Signal Switch assembly connectors to the steering column bulkhead connector before linking both assemblies together through the sir coil connector. Reinstall the wire harness assembly to the steering column wire harness straps while verifying that the lever position remains in the center or off position before reinstalling the steering column trim covers and Steering Wheel on the steering column. Reconnect the negative battery terminal while enabling the sir system in the last step.