Q: How to service and repair the Seat Heater Switch on Buick Park Avenue?
A: The replacement process of the heated seat switch starts by taking out the right accessory trim plate. The installation begins with disconnecting electric connectors and removing heated seat switches (3, 4) from the right accessory trim plate. The installation requires placement of heated seat switches (3, 4) in the right accessory trim plate followed by reconnection of electrical connectors before finally installing the right IP accessory trim plate.
Q: How to properly service and repair the Seat Heater Switch on Buick LeSabre?
A: The first step to replace the heated seat switch involves the removal of door trim panel. You must squeeze the tabs while using heat to push the heated seat switch out of its position behind the door trim panel. After that disconnect the electrical connectors. The door trim panel receives the heated seat switch and the retainer clip activates after switching the switch down before the door trim panel returns for installation.
Q: How to replace the front Seat Heater Switch on Buick Regal?
A: The replacement of front seat heater switches should begin with center console switch assembly disassembly through pressing the clips on each end followed by lifting the assembly from its position. One should first disconnect the electrical connector from either the right or left heater switch then extract the heater seat switch from the switch assembly. Put the seat heater switch inside the assembly and connect the electrical connector to the seat heater switch before snapping the switch assembly into the console trim plate for installation.