Q: How to Service and Repair the Mirror Switch on Buick LaCrosse?
A: The front door trim panel must be eliminated before the power mirror switch replacement begins. The electrical connector on the switch needs to be disconnected first before using a small flat-bladed tool to release and remove the power mirror switch retainers from the vehicle. The installation of the power mirror switch requires hooking up its electrical connector to the switch before pressing it into the retainer plate followed by reinstalling the front door trim panel.
Q: How to Safely Remove and Install a Mirror Switch on Buick Century?
A: The Power Window Switch must be disconnected at the first step before replacing the power Mirror Switch to prevent express up/down injuries. Protective coating or tape should be placed on the entry point for the small flat-bladed tool in order to safeguard the inner door trim panel from harm. The removal process must begin with the Ignition Switch in the off position to stop switch shorting. Start by driving a plastic flat-bladed instrument downward behind the switch mounting plate to withdraw the mounting plate retainer and simultaneously lift the front side of the plate. A small flat-bladed tool will free the Mirror Switch retainers so you can extract the switch before disconnecting the electrical connector which completes removal of the door component. To install the power Mirror Switch assembly users should first attach it to the mounting plate followed by electrical connector connection after which users must insert the mounting plate into the door trim panel opening to press down on the retainer.
Q: How to Safely Remove and Install a Mirror Switch on Buick Regal?
A: The first step for power Mirror Switch replacement requires insertion of a plastic flat-bladed tool into the front edge of the switch mounting plate to release the mounting plate retainer while lifting up on the front of the plate. The Power Window Switch needs to be detached to avoid risks from the express up/down feature that operates the door window fast. The switch plate and door trim panel removal must occur only when the Ignition Switch shows off because metal objects can short out the switch while it is removed. Users should use protective coating or tape at the small flat-bladed tool insertion area to protect the inner door trim panel from damage. By employing a small flat-bladed tool to detach the window switch retainers people can remove the switch after disconnecting the electrical connector. You should position the Power Window Switch assembly onto the mounting plate followed by connecting electrical connectors to the Power Window Switch until the mounting plate fully connects with the door trim panel opening by pressing down on the retainer.