Q: How to replace the cruise control module on Cadillac Eldorado?
A: Firstly, disconnect the cruise control cable from the throttle body cam along with throttle body bracket and cruise control module. Next, you should disconnect the electrical connector from cruise control module assembly and remove the cross car brace. Next, unscrew the nut fastening the cruise control mounting bracket to the left strut tower and pull the cruise control module assembly. Remove the fasteners to retain the cruise control module to the mounting bracket and remove the cruise control module from the mounting bracket. For installation, mount the cruise control module on a mounting bracket and fasten it with the fasteners , applying 7.5 N.m (66 lb in) of torque. Next, mount the cruise control module assembly on the upper left strut tower and fasten it with the nut on the stud. Reinstall the cross car brace and plug in the electrical connector to the cruise control module assembly. Finally replace the cruise control cable to the throttle body cam, throttle body bracket and cruise control module.
Q: How to Service and Repair the Cruise Control Module on a Cadillac Seville?
A: Start by detaching the cruise control cable followed by disconnecting the assembly's electrical connector to proceed with module replacement. Begin by disassembling fasteners that secure the module's position to mounting studs then remove the module from your vehicle. Begin by dislodging the fasteners which secure the bracket to the cruise control module before removing the bracket. Secure the cruise control module to the bracket while using the fasteners to fasten it at 7.5 N.m (66 lb in). After placing the cruise control module onto cowl studs apply fasteners and tension them to 9 N.m (80 lb in) torque. Reconnect your cruise control module electrical connector before you install the cruise control cable which the module will automatically adjust without requiring any mechanical modifications.
Q: How to replace the cruise control module on Cadillac DeVille?
A: In order to change the cruise control module, remove the cruise control cable, disconnect the electrical connector from cruise control module assembly , as well. Next, extract the nuts and bolt off of cruise control module head and remove the assembly. Then, take out the fasteners holding the bracket to the cruise control module and pull out the module from the mounting bracket. To install, mount the cruise control module onto the mounting bracket and install the fasteners with the mounting bracket secured, tightened to 7.5 N.m (66 lb in). Reconnect the cruise control module assembly to the body - 2 nuts and the bolt , tighten to 9 N.m 80 lb in. Join the electrical connector to the cruise control module. It is worth mentioning that the replacement of cruise control cable does not require a mechanical adjustment, as the-module can make the cable adjustment internally. Finally, retune the cruise control cable.