Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1987 Cadillac DeVille | Base, Cabriolet, d'Elegance, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
| Page 1 of 4 |Next >
1-20 of 63 Results
Cadillac DeVille Emblem
Our website offers an extensive catalog of genuine Cadillac DeVille Emblem at unbeatable prices. Every OEM Cadillac DeVille Emblem comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac DeVille Emblem Parts Questions & Experts Answers
Q: How to replace the emblem/nameplate on the 32 V Northstar engine on Cadillac DeVille?
A: Cadillac owners needing emblem/nameplate replacements for their 32 V Northstar engine vehicles should begin by cleaning the damaged panel with a soap water solution followed by a dry cloth application. Impurities must be removed from the panel and the emblem/nameplate with 3M General Purpose Adhesive Cleaner 08984 or a similar product before cleaning the panel with a towel and alcohol-water mixture. Apply masking tape or magnetic strip positioning marks for the emblem/nameplate area according to the following dimensions: "32 V Northstar" uses a marked area of 35 mm by 71 mm and 84.9 mm; "Cadillac" uses dimensions 35 mm x 78.1 mm x 83 mm. For the "32 V Northstar" emblem, dimension a is 35 mm, dimension b is 71 mm, and dimension c is 84.9 mm; The "32 V Northstar" emblem requires panel dimensions of 35 mm by 71 mm by 84.9 mm while the "Cadillac" emblem needs 35 mm by 78.1 mm by 83 mm dimensions. Heat the cold panel to above room temperature by using either a heat gun or heat lamp. Double-coated acrylic foam tape can be used according to the below specifications: 3M 06380 white, 3M 06377 black, or 3M 06377 gray when necessary. Install one of these tape types: 3M 06380 - white, 3M 06377 - black, or 3M 06377 - gray. The panel alignment should be completed before pressing the emblem/nameplate firmly to guarantee strong bonding. When working with Deville DHS DTS models, maintain the same introductory procedure that includes panel washing followed by drying then cleaning. Position the emblem/nameplate using masking tape or magnetic strips which measure 83.2 by 70.2 by 35 mm for the "DHS" or "DTS" symbols or 84.4 by 70.2 by 84.9 mm for the "DEVILLE" symbol. For the "DHS" or "DTS" emblem, dimension a is 83.2 mm, dimension b is 70.2 mm, and dimension c is 35 mm; The dimensions of the "DHS" or "DTS" emblem measure a=83.2mm, b=70.2mm, and c=35mm, whereas "DEVILLE" has dimensions a=84.4mm and b=70.2mm, c=84.9mm. To achieve proper adhesion of the emblem/nameplate, apply double-coated acrylic foam tape directly onto a warm panel while firmly pressing the emblem into position.