How to replace the shift cable for the range selector lever on Cadillac Escalade ESV?

Start the replacement of the Shift Cable by first positioning the Steering Column shift lever in the park position and then removing the instrument panel knee bolster. The driver seat must be removed before pulling back carpet together with insulation found in the driver compartment space. Unfasten the cable retainer from the column and detach its endpoint from the ball stud while tucking down the cable tangs to slip the cable out of the Steering Column bracket. Do this carefully to prevent accidental bending of the Shift Cable. Remove the cable from its mount on the support while you also remove the floor panel cable grommet. Lift the vehicle before removing clips from the cable attached to floor panel reinforcement while placing the transmission manual shaft in mechanical park position and taking off the Transfer Case clip if present. First disconnect the Shift Cable from its ball stud mount on the transmission range selector lever before using the retainer to remove it from the bracket and releasing the cable from the bracket using the tangs. Start by installing the transmission Shift Cable to the vehicle with the transmission manual shaft lever set at mechanical park. Install the bracketed Shift Cable while using the retainer to secure it before connecting its end to the transmission range selector lever ball stud. The cable clip should be installed on the Transfer Case followed by clips on the cable attached to the floor panel reinforcement. Lower the car and keep the steering lever in park position while installing the floor grommet opposite any excessive cable bending or twisting. Represent the Shift Cable to its support and Steering Column bracket while making sure that tangs become fully engaged. Use the cable end to connect the ball stud on the Steering Column before securing it with the provided retainer. Test the transmission for proper shift operation after repositioning the carpet and insulation around the driver area and reinstalling the driver seat with the instrument panel knee bolster. Check and adjust the cable when it is impossible to reach all gear positions.

OEM Cadillac Escalade ESV Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Shift Cables found

View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 20787609
$40.88 MSRP: $67.92
You Save: $27.04 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 20787608
$57.76 MSRP: $97.00
You Save: $39.24 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 15945100
$51.81 MSRP: $86.73
You Save: $34.92 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Cable Kit, Transmission Shift Control Cable
- Replaced by: 20787611
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 20787607
$85.00 MSRP: $145.98
You Save: $60.98 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 20787606
$41.78 MSRP: $71.12
You Save: $29.34 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 84525959
$44.59 MSRP: $65.50
You Save: $20.91 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 22893848
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 19434392
$35.85 MSRP: $57.94
You Save: $22.09 (39%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 84868716, 25995564
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 84867183
$31.98 MSRP: $52.68
You Save: $20.70 (40%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaced by: 86532014
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 84525957
$57.39 MSRP: $97.70
You Save: $40.31 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23258956, 22893849
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 84507729
$50.62 MSRP: $80.37
You Save: $29.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23174589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Shift Control Cable
Part Number: 19177020
$40.91 MSRP: $64.09
You Save: $23.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaces: 15945097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Cadillac Escalade ESV | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Parking Brake Cable
Part Number: 26082803
Product Specifications
- Other Name: Cable, Automatic Transmission Parking Lock; Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade ESV Shift Cable

Our website offers an extensive catalog of genuine Cadillac Escalade ESV Shift Cable at unbeatable prices. Every OEM Cadillac Escalade ESV Shift Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade ESV Shift Cable Parts Questions & Experts Answers

Shift Control Cable
20787609
Q: How to replace the shift cable for the range selector lever on Cadillac Escalade ESV?
A: Start the replacement of the Shift Cable by first positioning the Steering Column shift lever in the park position and then removing the instrument panel knee bolster. The driver seat must be removed before pulling back carpet together with insulation found in the driver compartment space. Unfasten the cable retainer from the column and detach its endpoint from the ball stud while tucking down the cable tangs to slip the cable out of the Steering Column bracket. Do this carefully to prevent accidental bending of the Shift Cable. Remove the cable from its mount on the support while you also remove the floor panel cable grommet. Lift the vehicle before removing clips from the cable attached to floor panel reinforcement while placing the transmission manual shaft in mechanical park position and taking off the Transfer Case clip if present. First disconnect the Shift Cable from its ball stud mount on the transmission range selector lever before using the retainer to remove it from the bracket and releasing the cable from the bracket using the tangs. Start by installing the transmission Shift Cable to the vehicle with the transmission manual shaft lever set at mechanical park. Install the bracketed Shift Cable while using the retainer to secure it before connecting its end to the transmission range selector lever ball stud. The cable clip should be installed on the Transfer Case followed by clips on the cable attached to the floor panel reinforcement. Lower the car and keep the steering lever in park position while installing the floor grommet opposite any excessive cable bending or twisting. Represent the Shift Cable to its support and Steering Column bracket while making sure that tangs become fully engaged. Use the cable end to connect the ball stud on the Steering Column before securing it with the provided retainer. Test the transmission for proper shift operation after repositioning the carpet and insulation around the driver area and reinstalling the driver seat with the instrument panel knee bolster. Check and adjust the cable when it is impossible to reach all gear positions.

Related Cadillac Escalade ESV Parts

Browse Cadillac Escalade ESV Shift Cable by Years

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003