How to replace the ABS Control Module without JL4 on Cadillac Escalade EXT?

To replace the brake pressure modulator valve (BPMV) without jl 4, it is important to clean the surrounding area of the electric hydraulic control unit (EHCU) to avoid contamination of abs component and wash away any drift. Remove the three electrical harness connectors from the electronic brake control module (EBCM) and mark/tie the brake lines properly before removing them from the bpmv. Unbolt the ehcu mounting bracket to the vehicular frame rail and pull out the ehcu from the vehicle. Next, unscrew the bolts that hold the bpmv to the ehcu mounting bracket, and take out the two way abs pump motor connector. Roll off the four t-25 torx® bolts and the ebcm from the bpmv, using only the gentle force to prevent a possible damage to the ebcm. Clean the mounting surfaces of the ebcm and bpmv, after which, install the ebcm on the bpmv without using rtv or any other form of sealant. Replace enconi new ebcm bolts together with the new bpmv and tighten them to 5 nm on exactly the x-pattern. Connect the two-way abs pump motor connector to the ebcm, then install the bpmv to the ehcu braket, and fasten it with bolts, which are tightened to 9 nm (7 ft. Lbs.). Replace the ehcu to the vehicle frame and tighten the three ehcu bracket bolts to 25 nm (18 ft. Lbs.). Join the two ebcm electrical harness connectors and move the brake pipes back to the plastic bracket on the frame prior to installing the bpmv brake pipes to the connections and tightening to 30 nm (22 ft. Lbs.) vivastreet. Finally, bleed the break system using the proper procedures.

OEM Cadillac Escalade EXT ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 ABS Control Modules found

View related parts
Cadillac Escalade EXT Control Module
Part Number: 20896914
$1584.98 MSRP: $2714.92
You Save: $1129.94 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; ABS Control Unit; Module Kit, Electronic Brake Control
- Replaces: 20817954, 25834221, 25834371, 25989530, 25989531
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade EXT | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade EXT Control Module
Part Number: 19244895
$790.28 MSRP: $1593.66
You Save: $803.38 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module; ABS Control Unit
- Replaces: 19122252, 88982938, 88982305
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Control Module
Part Number: 19244894
$458.32 MSRP: $965.12
You Save: $506.80 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module; ABS Control Unit
- Replaces: 88982307, 88982285, 19121924, 88982936, 88935867
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Control Module
Part Number: 15905737
$432.59 MSRP: $808.62
You Save: $376.03 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit, Electronic Brake Control; ABS Control Module; ABS Control Unit
- Replaces: 15850403
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Cadillac Escalade EXT | Base | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Control Module
Part Number: 19244897
$761.07 MSRP: $1206.65
You Save: $445.58 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module; ABS Control Unit
- Replaces: 88935641, 88982296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Pressure Valve
Part Number: 88983913
Product Specifications
- Other Name: Valve, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Replaces: 88982364, 88948552
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Pressure Valve
Part Number: 19149234
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Replaces: 12475232, 12476308, 12478048, 12472988, 12475563, 88982306, 88935631, 88964302, 88935847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Pressure Valve
Part Number: 19122463
Product Specifications
- Other Name: Valve, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Replaces: 19133278, 88982909, 19149034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006, 2003-2004 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Control Module
Part Number: 25912635
$594.21 MSRP: $1066.86
You Save: $472.65 (45%)
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; ABS Control Unit; Module Kit, Electronic Brake Control
- Replaces: 25801032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Cadillac Escalade EXT | Base | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Control Module
Part Number: 88982365
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Pressure Valve
Part Number: 19417210
Product Specifications
- Other Name: Valve Kit, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve Kit, Electronic Brake Control
- Replaces: 25801031, 19416856, 25912640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Cadillac Escalade EXT | Base | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Pressure Valve
Part Number: 19417201
Product Specifications
- Other Name: Valve Kit, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve Kit, Electronic Brake Control
- Replaces: 15905736, 19416847, 15850402
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Cadillac Escalade EXT | Base | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Pressure Valve
Part Number: 15269817
Product Specifications
- Other Name: Modulator Valve; ABS Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade EXT ABS Control Module

Our website offers an extensive catalog of genuine Cadillac Escalade EXT ABS Control Module at unbeatable prices. Every OEM Cadillac Escalade EXT ABS Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade EXT ABS Control Module Parts Questions & Experts Answers

Control Module
19244894
Q: How to replace the ABS Control Module without JL4 on Cadillac Escalade EXT?
A: To replace the brake pressure modulator valve (BPMV) without jl 4, it is important to clean the surrounding area of the electric hydraulic control unit (EHCU) to avoid contamination of abs component and wash away any drift. Remove the three electrical harness connectors from the electronic brake control module (EBCM) and mark/tie the Brake Lines properly before removing them from the bpmv. Unbolt the ehcu mounting bracket to the vehicular frame rail and pull out the ehcu from the vehicle. Next, unscrew the bolts that hold the bpmv to the ehcu mounting bracket, and take out the two way abs pump motor connector. Roll off the four t-25 torx® bolts and the ebcm from the bpmv, using only the gentle force to prevent a possible damage to the ebcm. Clean the mounting surfaces of the ebcm and bpmv, after which, install the ebcm on the bpmv without using rtv or any other form of sealant. Replace enconi new ebcm bolts together with the new bpmv and tighten them to 5 nm on exactly the x-pattern. Connect the two-way abs pump motor connector to the ebcm, then install the bpmv to the ehcu braket, and fasten it with bolts, which are tightened to 9 nm (7 ft. Lbs.). Replace the ehcu to the vehicle frame and tighten the three ehcu bracket bolts to 25 nm (18 ft. Lbs.). Join the two ebcm electrical harness connectors and move the brake pipes back to the plastic bracket on the frame prior to installing the bpmv brake pipes to the connections and tightening to 30 nm (22 ft. Lbs.) vivastreet. Finally, bleed the break system using the proper procedures.

Related Cadillac Escalade EXT Parts

Browse Cadillac Escalade EXT ABS Control Module by Years

2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002