How to replace the Wheel Speed Sensor (WSS) on the front of a 4 Wheel Drive on Cadillac Escalade EXT?

When replacing the Wheel Speed Sensor of a four-wheel-drive vehicle start by raising and securing the car before taking off the tire and wheel. To begin the procedure you first need to take off the brake rotor per 1500 series instructions. Take off the wss cable from its mounts at the knuckle and upper Control Arm before disconnecting the electrical connector at the frame attachment point. Separate the wss mounting bolt and ease it out of the hub/bearing assembly on the 2500/3500 model surfaces without forcing or breaking the sensor. To set up the fresh wss keep the hub bore sealed and rub the hub mounting area with a wire brush to prepare it for service. Also apply wheel bearing grease gm p/n 01051344 thin layer to the hub and sensor o-ring. Apply the wss unit against the hub surface and clamp the sensor bolt using a torque value of 18 nm (13 ft. Lbs). Put the tire and wheel back, reconnect the brake rotor to the 1500 series and attach the wss cable connector to its electrical terminal. Also remount wss cable retainer to its locations on knuckle, upper Control Arm and frame bracket. Complete the diagnostic system check - vehicle to verify system operations.

OEM Cadillac Escalade EXT Wheel Speed Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheel Speed Sensors found

View related parts
Cadillac Escalade EXT Speed Sensor
Part Number: 24225896
$30.84 MSRP: $50.80
You Save: $19.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Vehicle Speed; Vehicle Speed Sensor; ABS Sensor; Sensor, Computer Control Sensors; Sensor, Speedometer Drive; Sensor, Speedometer
- Replaces: 10456520, 10456194
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT ABS Sensor, Front
Part Number: 84356647
$47.84 MSRP: $93.66
You Save: $45.82 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Front Wheel Speed; ABS Wheel Speed Sensor; Wheel Speed Sensor; Front Speed Sensor; Sensor Kit, Electronic Brake Control
- Position: Front
- Replaces: 22870821, 15229012, 22740468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Cadillac Escalade EXT | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Yaw Rate Sensor
Part Number: 25930324
$393.08 MSRP: $762.90
You Save: $369.82 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Hydraulic Suspension; Yaw Sensor; Sensor; Sensor, Electronic Brake Control; Sensor, Suspension
- Replaces: 15197080
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Cadillac Escalade EXT | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT ABS Sensor, Rear
Part Number: 20938122
$72.42 MSRP: $140.55
You Save: $68.13 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Rear Wheel Speed; ABS Wheel Speed Sensor; ABS Speed Sensor; Rear Speed Sensor; Sensor, Electronic Brake Control
- Position: Rear
- Replaces: 15121067
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Cadillac Escalade EXT | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Vehicle Speed Sensor
Part Number: 19302667
$45.64 MSRP: $88.57
You Save: $42.93 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Speed Sensor; Sensor, Speedometer Driven; Sensor, Speedometer Drive; Sensor, Speedometer
- Replaces: 12376520, 88984527
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT ABS Sensor, Front
Part Number: 15233108
$34.44 MSRP: $64.68
You Save: $30.24 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Front Wheel Speed; ABS Wheel Speed Sensor; ABS Speed Sensor; Speed Sensor; Trim Panel; Front Speed Sensor; Sensor, Electronic Brake Control
- Position: Front
- Replaced by: 84356646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade EXT Wheel Speed Sensor

Our website offers an extensive catalog of genuine Cadillac Escalade EXT Wheel Speed Sensor at unbeatable prices. Every OEM Cadillac Escalade EXT Wheel Speed Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade EXT Wheel Speed Sensor Parts Questions & Experts Answers

Speed Sensor
24225896
Q: How to replace the Wheel Speed Sensor (WSS) on the front of a 4 Wheel Drive on Cadillac Escalade EXT?
A: When replacing the Wheel Speed Sensor of a four-wheel-drive vehicle start by raising and securing the car before taking off the tire and wheel. To begin the procedure you first need to take off the brake rotor per 1500 series instructions. Take off the wss cable from its mounts at the knuckle and upper Control Arm before disconnecting the electrical connector at the frame attachment point. Separate the wss mounting bolt and ease it out of the hub/bearing assembly on the 2500/3500 model surfaces without forcing or breaking the sensor. To set up the fresh wss keep the hub bore sealed and rub the hub mounting area with a wire brush to prepare it for service. Also apply wheel bearing grease gm p/n 01051344 thin layer to the hub and sensor o-ring. Apply the wss unit against the hub surface and clamp the sensor bolt using a torque value of 18 nm (13 ft. Lbs). Put the tire and wheel back, reconnect the brake rotor to the 1500 series and attach the wss cable connector to its electrical terminal. Also remount wss cable retainer to its locations on knuckle, upper Control Arm and frame bracket. Complete the diagnostic system check - vehicle to verify system operations.