ChevyParts
My Garage
My Account
Cart
OEM Cadillac Escalade EXT Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Starters found
Cadillac Escalade EXT Starter
Part Number: 89018123$296.33 MSRP: $586.32You Save: $289.99 (50%)Ships in 1-2 Business Days
Cadillac Escalade EXT Starter
Part Number: 89017630$270.11 MSRP: $534.27You Save: $264.16 (50%)Ships in 1-2 Business Days
Cadillac Escalade EXT Starter
Part Number: 19180529$233.65 MSRP: $461.90You Save: $228.25 (50%)Ships in 1-2 Business Days
Cadillac Escalade EXT Starter
Part Number: 19180528$170.34 MSRP: $476.91You Save: $306.57 (65%)Ships in 1-2 Business Days
Cadillac Escalade EXT Starter
Part Number: 89017844$294.17 MSRP: $646.70You Save: $352.53 (55%)Ships in 1-2 Business Days
Cadillac Escalade EXT Starter
Part Number: 10465385$332.72 MSRP: $657.20You Save: $324.48 (50%)Ships in 1-2 Business Days
Cadillac Escalade EXT Starter
Our website offers an extensive catalog of genuine Cadillac Escalade EXT Starter at unbeatable prices. Every OEM Cadillac Escalade EXT Starter comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Escalade EXT Starter Parts Questions & Experts Answers
- Q: How to replace the starter motor on Cadillac Escalade EXT?A: A vehicle replacement procedure for Starter motors begins with disconnecting the negative Battery Cable followed by vehicles suspension. The first step is to remove the transmission cover bolt while those with four wheel drive (4WD) should untighten the front axle mounting bracket nuts to place the front axle mounting bracket bolt in correct alignment with the support bushing without removing the bolt. Start by taking off the Starter bolts along with removing the oil level sensor electrical connector. Migrate the Starter at least 5.0 cm forward beyond the transmission while removing the Starter lead nut followed by the Starter lead as well as positive cable nut and positive cable. The Starter should be positioned on a workbench while you need to remove both the transmission cover snap and any Starter heat shield protection. Start by attaching the Starter heat shield to its place and then secure the transmission cover onto the Starter if required. The positive cable installation requires connecting it to the starting component while applying the positive cable nut and tightening it to 9 n.m (80 lb in). Connect the Starter lead and fasten the Starter lead nut tight at 3.4 n.m (30 lb in). Position the Starter into place before installing Starter bolts which should be tightened to 50 n.m (37 lb ft). The front axle mounting bracket nuts require tightening to 95 n.m (70 lb ft) after ensuring the bolt for the front axle mounting bracket bolt is fully engaged and 4wd systems are present. End by installing the transmission cover bolt which requires 9 n.m torque (80 lb in torque) before lowering the vehicle and restoring the negative Battery Cable.
