How to replace the outer rear wheel steering tie rod end on Cadillac Escalade EXT?

The starting point for outer rear wheel steering Tie Rod End replacement involves hoisting the vehicle and subsequently removing the tire as well as wheel. You should start by detaching the tie rod bracket retaining bolts which secure the Steering Knuckle then loosen the tie rod jam nut. The universal steering linkage puller (J 24319-B) enables detachment of the outer Tie Rod End from the Steering Knuckle after removing the nut that retains them together. Next detach the Tie Rod End outer section from the inner rod. The correct procedure for installation starts with attaching the outer Tie Rod End to the inner tie rod followed by attaching it to the Steering Knuckle. First install and tighten the outer Tie Rod End retaining nut to the Steering Knuckle to 55 nm (40 ft. Lbs.) then proceed to add the outer Tie Rod End retaining bracket while tightening its mounting bolts to 65 nm (48 ft. Lbs.). As the last step install the tire and wheel then schedule a four-wheel alignment procedure.

OEM Cadillac Escalade EXT Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
Cadillac Escalade EXT Outer Tie Rod
Part Number: 19149617
$80.87 MSRP: $132.39
You Save: $51.52 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 12471376
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade EXT Outer Tie Rod
Part Number: 15254061
$109.31 MSRP: $186.10
You Save: $76.79 (42%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Cadillac Escalade EXT | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade EXT Outer Tie Rod
Part Number: 26076544
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Cadillac Escalade EXT | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade EXT Tie Rod End

Our website offers an extensive catalog of genuine Cadillac Escalade EXT Tie Rod End at unbeatable prices. Every OEM Cadillac Escalade EXT Tie Rod End comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade EXT Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod
19149617
Q: How to replace the outer rear wheel steering tie rod end on Cadillac Escalade EXT?
A: The starting point for outer rear wheel steering Tie Rod End replacement involves hoisting the vehicle and subsequently removing the tire as well as wheel. You should start by detaching the tie rod bracket retaining bolts which secure the Steering Knuckle then loosen the tie rod jam nut. The universal steering linkage puller (J 24319-B) enables detachment of the outer Tie Rod End from the Steering Knuckle after removing the nut that retains them together. Next detach the Tie Rod End outer section from the inner rod. The correct procedure for installation starts with attaching the outer Tie Rod End to the inner tie rod followed by attaching it to the Steering Knuckle. First install and tighten the outer Tie Rod End retaining nut to the Steering Knuckle to 55 nm (40 ft. Lbs.) then proceed to add the outer Tie Rod End retaining bracket while tightening its mounting bolts to 65 nm (48 ft. Lbs.). As the last step install the tire and wheel then schedule a four-wheel alignment procedure.