Other Name: Injector Kit-Multiport Fuel (Service Kit High Flow); Injector Kit, Fuel Injection
Replaces: 12710483, 12692694
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2021 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 8 Cyl 6.2 L GAS
Cadillac Escalade Fuel Injector
Our website offers an extensive catalog of genuine Cadillac Escalade Fuel Injector at unbeatable prices. Every OEM Cadillac Escalade Fuel Injector comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Escalade Fuel Injector Parts Questions & Experts Answers
Q: How to clean fuel injectors effectively on Cadillac Escalade?
A: The cleaning process requires these tools: Fuel Line Shut-Off Adapters (J 37287) alongside Fuel Injector Cleaner (J 35800-A) and the 3/8 Fuel Line Shut-Off Valve (J 42873-1) and 5/16 Return Pipe Shut-Off Valve (J 42873-2). Furthermore, the set includes 3/8 Fuel Pipe Shut-Off Valve (J 42964-1) and 5/16 Fuel Pipe Shut-Off Valve (J 42964-2). When using GM Top-Engine Cleaner exclusively you must avoid placing it in the fuel tank but the maximum solution concentration should stay at 10 percent. Candidates should replace vehicle injectors when the odometer reaches below 160 km (100 mi). The required cleaning solution amount is 960 ml (32.4 oz) and it equals two tanks of the Fuel Injector Cleaner (J 35800-A). First close the valve at the canister bottom followed by adding two pre-measured GM Top-Engine Cleaner containers to the Fuel Injector Cleaner unit for US dealers or adding 48 ml (1.62 oz) of Canadian Top-Engine Cleaner measure for Canadian dealers. Users who choose a different brand need to combine 3.24 oz of Top-Engine Cleaner with 29.16 oz of regular unleaded gasoline. First, add gasoline into the cleaning tank then disable the fuel pump followed by disconnecting fuel lines while using proper shut-off valves to plug them. The Fuel Injector Cleaner (J 35800-A) requires attachment to the fuel rail before increasing pressure to 510 kPa (75 psi) and engine operation until stall occurs. Reconnect the fuel pump relay then lines before letting the vehicle run for two minutes while cleaning residual solution. The test requires measuring injector pressure drops during a balance test until the lowest pressure falls outside 15 kPa (2 psi) from other injectors which signals the need to replace that particular unit. The customer should utilize GM Port Fuel Injector Cleaner GM P/N 12345104 or Canadian P/N 10953467 in amounts of one ounce per fuel tank gallon and know to use this product repeatedly to minimize future occurrences. The vehicle needs to be driven in order to verify that the customer's problem has been corrected.