Other Name: Antenna Assembly, Radio Power (W/O Gear & Motor); Antenna Assembly; Power Antenna Hardware Kit; Tube; Mast; Antenna, Radio Antenna(Electric); Antenna, Radio Antenna
Replaces: 22154397
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1993 Cadillac Seville | Base, STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
Other Name: Antenna Kit, Radio Antenna; Repair Kit; Tube; Mast
Replaces: 22100456
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994-1997 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
Cadillac Seville Antenna
Our website offers an extensive catalog of genuine Cadillac Seville Antenna at unbeatable prices. Every OEM Cadillac Seville Antenna comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Seville Antenna Parts Questions & Experts Answers
Q: How to remove and reinstall the GPS antenna module on Cadillac Seville?
A: To remove the gps Antenna module, first, do you remove the rear shelf trim and disconnect the electrical connections from the rear speaker and modules on the panel. Then, remove the wire harness from the retaining clips placed on the panel. Drag the center of each pushpin to remove the pushpins holding the gps Antenna module to the rear shelf trim panel and then pull it out in total. After that remove the gps Antenna module assembly. For installation, reverse fit the gps Antenna module reinstall it onto the rear shelf trim panel and secure it using the pushpins by pressing pin center down to engage/train the pushpins in the slots. Lastly, the gps wiring harness should be reattached to the retainers on the rear shelf trim panel to hold it. Then the wiring should be connected to the rear speaker and also the modules on the panel. Finally, put back the rear shelf trim panel.