How to replace the navigation antenna on 2004 Cadillac Seville?

Start the navigation antenna replacement process by eliminating the rear shelf trim panel while also disconnecting the GPS antenna wire harness from its retaining clips on the panel. Push the antenna module retaining pushpins out one at a time starting from each pin's central part. Proceed to remove the GPS antenna module from the rear shelf trim panel after that step. Push every pin center of the GPS antenna module into position to lock the assembly on the rear shelf trim panel before installation. After all steps are completed the vehicle should get its rear shelf trim panel installed as per the initial setup.

OEM 2004 Cadillac Seville Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Antennas found

View related parts
2004 Cadillac Seville Antenna Assembly
Part Number: 25761436
Product Specifications
- Other Name: Antenna, Power Radio Antenna; Antenna
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 6.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25761436
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac Seville Submodels:
- SLS | 8 Cyl 4.6 L GAS
View related parts
2004 Cadillac Seville Antenna Assembly
Part Number: 12451036
Product Specifications
- Other Name: Antenna, Vehicle Navigation/Information
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.9 x 9.0 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12451036
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2004 Cadillac Seville Antenna Assembly
Part Number: 25731632
Product Specifications
- Other Name: Antenna Assembly-Navigation; Antenna, Vehicle Navigation/Information
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.6 x 5.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25731632
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2004 Cadillac Seville Antenna Assembly
Part Number: 25691146
Product Specifications
- Other Name: Antenna Assembly-Remote Control Door Lock Receiver; Antenna, Door Electric And Vacuum Locks
- Item Weight: 0.40 Pounds
- Item Dimensions: 37.1 x 3.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25691146
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2004 Cadillac Seville Antenna

With a comprehensive array of OEM 2004 Cadillac Seville Antenna, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac Seville Antenna are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Cadillac Seville Antenna Parts Questions & Experts Answers

Q: How to replace the navigation antenna on 2004 Cadillac Seville?
A: Start the navigation antenna replacement process by eliminating the rear shelf trim panel while also disconnecting the GPS antenna wire harness from its retaining clips on the panel. Push the antenna module retaining pushpins out one at a time starting from each pin's central part. Proceed to remove the GPS antenna module from the rear shelf trim panel after that step. Push every pin center of the GPS antenna module into position to lock the assembly on the rear shelf trim panel before installation. After all steps are completed the vehicle should get its rear shelf trim panel installed as per the initial setup.