How to replace the MAP Sensor on 2004 Cadillac Seville?

To change the manifold absolute pressure (MAP) sensor, turn the ignition off and disconnect MAP Sensor electrical connector. Then unbolt the throttle cable bracket, remove it and the unscrew the MAP Sensor from the Intake Manifold. Check MAP Sensor grommet for wear or damage and replace if necessary. To install, re-install the MAP Sensor back to the Intake Manifold ensuring to follow the fastener notice in service precautions. Reinstall the throttle cable bracket and bolts and tighten to 12 nm (106 lb in) then finally reconnect the MAP Sensor electrical connector.

OEM 2004 Cadillac Seville MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2004 Cadillac Seville M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2004 Cadillac Seville MAP Sensor

With a comprehensive array of OEM 2004 Cadillac Seville MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac Seville MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Cadillac Seville Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2004 Cadillac Seville?
A: To change the manifold absolute pressure (MAP) sensor, turn the ignition off and disconnect MAP Sensor electrical connector. Then unbolt the throttle cable bracket, remove it and the unscrew the MAP Sensor from the Intake Manifold. Check MAP Sensor grommet for wear or damage and replace if necessary. To install, re-install the MAP Sensor back to the Intake Manifold ensuring to follow the fastener notice in service precautions. Reinstall the throttle cable bracket and bolts and tighten to 12 nm (106 lb in) then finally reconnect the MAP Sensor electrical connector.