How to ensure a secure fit for the bumper on a Cadillac Seville?

Start the replacement of rear bumper fascia by raising and supporting the vehicle before proceeding with the next steps. Push-in retainers must be removed from their positions which fasten the rear bumper fascia to the body structure. The next step is to remove both rear wheelhouse extensions. The bolt holding the rear bumper fascia at the wheelhouse opening must be removed. The vehicle needs to be at its lowest position while the rear compartment lid requires opening. Start by taking off the rear compartment side trim panels and then proceed with unbolted the rear bumper fascia from the quarter panels and unscrewed the fascia from the vehicle. Unplug the Ultrasonic Rear Park Assist harness connector located on the passenger side of the rear bumper fascia before taking off the rear bumper fascia from the vehicle. detach the Rear Object Sensor Assemblies from their position on the rear bumper fascia. Start your installation by placing the Rear Object Sensor Assemblies inside the rear bumper fascia. Next install the rear bumper fascia on the vehicle framework while inserting the necessary nuts then secure them by adjusting torque to 9 N.m (80 lb in). Utilize the right-hand side of the rear bumper fascia to connect the Ultrasonic Rear Park Assist electrical connector before installing bolts for fascia attachment to quarter panels at 9 N.m (80 lb in). First install the rear compartment side trim panels before closing the rear compartment lid when you support the vehicle at an elevated position. Finish the installation by inserting the bolt at the wheelhouse opening of the rear bumper fascia and tightening it to 9 N.m (80 lb in). Then reinstall the rear wheelhouse extensions and attach the rear bumper fascia to the body using the push-in retainers before lower the vehicle down.

OEM Cadillac Seville Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Bumpers found

View related parts
Cadillac Seville Bumper Cover, Front
Part Number: 25710125
Product Specifications
- Other Name: Fascia Assembly, Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Bumper Cover
Part Number: 25705022
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Bumper Cover, Rear
Part Number: 25678020
Product Specifications
- Other Name: Fascia Assembly, Rear Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Bumper Cover
Part Number: 19245378
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 25678022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Cadillac Seville | SLS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Bumper Cover
Part Number: 19245376
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 25678170
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2004 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Bumper Cover, Rear
Part Number: 3548888
Product Specifications
- Other Name: Fascia-Rear Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Cadillac Seville | Base, SLS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Bumper Cover, Front
Part Number: 3548886
Product Specifications
- Other Name: Fascia-Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Cadillac Seville | Base, SLS, STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Bumper Cover, Rear
Part Number: 3548883
Product Specifications
- Other Name: Fascia-Rear Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Cadillac Seville | STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Bumper Cover, Front
Part Number: 3548881
Product Specifications
- Other Name: Fascia-Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Cadillac Seville | Base, SLS, STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Bumper Cover
Part Number: 20723399
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1991 Cadillac Seville | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Bumper Cover
Part Number: 20687143
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Cadillac Seville | Base, STS | 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Bumper Cover
Part Number: 1636295
Product Specifications
- Other Name: Fascia; Fascia, Front And Rear Bumper/Fascia Face
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1989 Cadillac Seville | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS

Cadillac Seville Bumper

Our website offers an extensive catalog of genuine Cadillac Seville Bumper at unbeatable prices. Every OEM Cadillac Seville Bumper comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Seville Bumper Parts Questions & Experts Answers

Bumper Cover
19245376
Q: How to ensure a secure fit for the bumper on a Cadillac Seville?
A: Start the replacement of rear bumper fascia by raising and supporting the vehicle before proceeding with the next steps. Push-in retainers must be removed from their positions which fasten the rear bumper fascia to the body structure. The next step is to remove both rear wheelhouse extensions. The bolt holding the rear bumper fascia at the wheelhouse opening must be removed. The vehicle needs to be at its lowest position while the rear compartment lid requires opening. Start by taking off the rear compartment side trim panels and then proceed with unbolted the rear bumper fascia from the quarter panels and unscrewed the fascia from the vehicle. Unplug the Ultrasonic Rear Park Assist harness connector located on the passenger side of the rear bumper fascia before taking off the rear bumper fascia from the vehicle. detach the Rear Object Sensor Assemblies from their position on the rear bumper fascia. Start your installation by placing the Rear Object Sensor Assemblies inside the rear bumper fascia. Next install the rear bumper fascia on the vehicle framework while inserting the necessary nuts then secure them by adjusting torque to 9 N.m (80 lb in). Utilize the right-hand side of the rear bumper fascia to connect the Ultrasonic Rear Park Assist electrical connector before installing bolts for fascia attachment to quarter panels at 9 N.m (80 lb in). First install the rear compartment side trim panels before closing the rear compartment lid when you support the vehicle at an elevated position. Finish the installation by inserting the bolt at the wheelhouse opening of the rear bumper fascia and tightening it to 9 N.m (80 lb in). Then reinstall the rear wheelhouse extensions and attach the rear bumper fascia to the body using the push-in retainers before lower the vehicle down.

Related Cadillac Seville Parts

Browse Cadillac Seville Bumper by Years

2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986