Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Other Name: Lock Assembly, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock, Rear Compartment Lid Or Tail Gate Latch; Lock, Rear Compartment Lid
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1985 Cadillac Seville | Base, Elegante | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Power Steering Pump; Trunk Latch; Flex Hose; Manifold Gasket; Vapor Canister; Lock Assembly; Intermediate Pipe; Rear Flex Hose; Latch, Rear Lid Release
Position: Rear
Replaces: 25696865, 25707328
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1993-2003 Cadillac Seville | Base, SLS, STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
Cadillac Seville Trunk Latch
Our website offers an extensive catalog of genuine Cadillac Seville Trunk Latch at unbeatable prices. Every OEM Cadillac Seville Trunk Latch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Seville Trunk Latch Parts Questions & Experts Answers
Q: How to replace the rear trunk latch with an interior release handle on Cadillac Seville?
A: Start the work by opening the trunk and taking off the trunk trim panel. Forcefully push the locking tab off the trunk inner handle retainer until you can pull it out from its position on the "t" slot. Unhook the lock cylinder latch release cable from the Trunk Lock Cylinder by pressing both holding tabs to release it. Unplug the electrical wire from the Trunk Latch then separate the fasteners keeping the latch attached to the trunk. Remove both parts of the Trunk Latch system. Place the Trunk Latch onto its proper position and connect fasteners but do not tighten them over 25 n.m (18 lb ft). Join the power connections to the latch while fitting the lock cylinder release wire and hanging the interior release handle onto the trunk. Put back the trunk trim part then shut the trunk.