How to replace the rear trunk latch with an interior release handle on 2001 Cadillac Seville?

Start the work by opening the trunk and taking off the trunk trim panel. Forcefully push the locking tab off the trunk inner handle retainer until you can pull it out from its position on the "t" slot. Unhook the lock cylinder latch release cable from the Trunk Lock Cylinder by pressing both holding tabs to release it. Unplug the electrical wire from the Trunk Latch then separate the fasteners keeping the latch attached to the trunk. Remove both parts of the Trunk Latch system. Place the Trunk Latch onto its proper position and connect fasteners but do not tighten them over 25 n.m (18 lb ft). Join the power connections to the latch while fitting the lock cylinder release wire and hanging the interior release handle onto the trunk. Put back the trunk trim part then shut the trunk.

OEM 2001 Cadillac Seville Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Trunk Latches found

View related parts
2001 Cadillac Seville Lock Assembly, Rear Part Number: 25726746
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock; Latch, Rear Compartment Lid Release Or Ajar
- Position: Rear
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.7 x 5.0 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25726746
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Crankshaft Position Sensor, Rear Part Number: 25717076
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Power Steering Pump; Trunk Latch; Flex Hose; Manifold Gasket; Vapor Canister; Lock Assembly; Intermediate Pipe; Rear Flex Hose; Latch, Rear Lid Release
- Position: Rear
- Replaces: 25696865, 25707328
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.1 x 7.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25717076
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- Base, SLS, STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

2001 Cadillac Seville Trunk Latch

With a comprehensive array of OEM 2001 Cadillac Seville Trunk Latch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Seville Trunk Latch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac Seville Trunk Latch Parts and Q&A

Q: How to replace the rear trunk latch with an interior release handle on 2001 Cadillac Seville?
A: Start the work by opening the trunk and taking off the trunk trim panel. Forcefully push the locking tab off the trunk inner handle retainer until you can pull it out from its position on the "t" slot. Unhook the lock cylinder latch release cable from the Trunk Lock Cylinder by pressing both holding tabs to release it. Unplug the electrical wire from the Trunk Latch then separate the fasteners keeping the latch attached to the trunk. Remove both parts of the Trunk Latch system. Place the Trunk Latch onto its proper position and connect fasteners but do not tighten them over 25 n.m (18 lb ft). Join the power connections to the latch while fitting the lock cylinder release wire and hanging the interior release handle onto the trunk. Put back the trunk trim part then shut the trunk.